Search results

By chance did this mower have the hydraulic deck lift?

It sounds like it all worked out in the end, albeit a long walk to the barn. But are you saying Amazon might get you the $313 as well, or just the initial $595?

The verdict is.....tired old battery. I installed back in March 2012....man does time fly! Voltage fluctuated between 7-8 volts when cranking. Good call on checking starter interlock system. The wires to the PTO lever had 3" of the insulation chewed off them! Few pieces of heat shrink...

Thinking about it, that battery is probably going on 6+ years. And no, I did not check battery voltage while cranking....why I don't know. Good to know on the ignition switch, too. Appreciate the input and direction. Will continue again this evening.

Have had a problem recently whereby my G5200 mower requires a boost to battery to start it. Investigating things have shown starter solenoid terminal voltage drops to 10v when key is turned to start. Bypassing key with a push button from starter batt terminal to solenoid terminal, engine will...

Have no experience with the Kubota UTV's. Really wanted a diesel one, but settled for Kawasaki 610 Mule. For our use the gasser made better sense. Only have about 5 acres. Lots of engine start/stop with yard work, moving stuff between garages, etc. Its no speed demon, but one tough little...

Nice work! Those are not dents, but scars & character. Wear them proudly....cause chics dig 'em!

I too am shopping for a used disc. Have been focused on a 3 point....until now.... That's an excellent point about the turning aspect I had not considered. And some of my intended areas of use involve tight areas with lots of maneuvering. Appreciate the insight.

Wow...something else KTAC covers! Hello...Kubota...yes everything is fine, however I need to make a reservation for....

Must give him props for ingenuity. looks like it popped the bead on right tire.

We use SAMS for the essentials (frozen & canned foods, coffee, paper goods, etc) but never, ever fresh meat. Walmart either. Completely agree on smaller, local grocers having good selection of meat. Aldi too has good meat, especially pork for the smoker.

Wonder if that tastes like chicken?

Then how come I see many ads for women's garments....

An example of max gross profit & inexperienced staff. But more often than not, buying local works well. Recently I sold my father's tractor. 20 year old B2400 in fine shape. But loader hoses were shot from age. He had replaced 4 in last 2-3 years. I had a local (3 miles away) shop make...

I have my moments!

Go simple...weld two grab hooks on the deck and just use a chain.

Flip & SDT....I concur that it's likely nothing to worry about. Tonight I popped off the round rubber plug that allows access to blade bolts. Looked & felt around to the extent the hole allows. Other than dust and clippings, no twigs or sticks. Will keep an eye/ear on it next couple uses...

Is this an issue....after I finished cutting field today, disengaged PTO on Landpride brush cutter and raised deck Parked & shut down tractor. Got off, removed ear plugs and noticed a clicking sound coming from mower gear box as blades were slowly coming to a stop. Grear box was warm, but...

Folks like that amaze me. He'll never have a blow out, seized bearing, or any other calamity. Nor will he be in an accident...might cause a few though!

Now that would be mailing a bomb!