Search results

I used Rustoleum Epoxy-shield Water-based Epoxy Floor Coating, with a Solvent Based Clear Coat and Non Slip Additive. It has held up great from 2012, Highly recommend it, (with a GOOD acid wash first) unless it is a new pour on the floor.

Since you asked........... It is really in three pieces.....

I found it would be nice to "clear" the shop, clean the floor, change oil in the Subie, etc. But had half a tractor in my way......... Problem solved, No second tractor available, Use the Willys! Just lashed the two together with come-alongs and we are good to go.

Thank you so much, please don't rush on my account. The high this weekend might have been 17, & I haven't even painted the engine part of this project. It will be quite a while before I actually need decals, but it doesn't hurt to have my ducks in a row. Thanks again.

Russell, those are some of the best pics of proper decal placement I have seen, and I have spent hours on the net looking at tractor pics! Thank you much, as I mentioned, if you have scans of any / all I would love to have them. Thanks again.....

Thanks Russell, I will look at your album, If you in fact have decals that you can scan, that would be fantastic! My email is.... thekubotaproject <at>gmail I will also look over your album. moderator note: Edited your email address. Please do not put addresses and phone numbers in typical...

Thanks for all the input, the general consensus, while that gear is serviceable most would swap it out while she is apart. I did find that the person I am dealing with for transmission parts does in fact have two (OEM), and to quote "It is discontinued and very difficult/impossible to find it...

I have my transmission apart to repair a reverse problem. I have an obvious problem with the main shaft, I am wondering if I could get opinions on the reverse gear and the 45 / 56 gear. The reverse gear is not too expensive, however the larger 45 / 56 gear runs about $200.00 and I am torn if it...

Somewhere I did see some photos, that a gentleman had put blue water as we call it in the states, windshield washer fluid that does not freeze in his tires. I came across these photos, because he posted something as a reply and added some photos, this led me to his photo site where I Peru's to...

well if they are I have not been able to find them, I've searched everywhere I have also sent vic PM's and emails regarding other parts and not heard anything I wasn't sure what was going on with him at this point. I ended up ordering my input shaft from someone else. Wake if you're out there...

Well, not sure how the photo got rotated upside down. That's what happens when I use my phone I guess.

I am in the process of restoring a L1500 DT, & I would like to request if anyone has one of these units and can take good quality photos of any decals that are on the unit and email them to me I would greatly appreciate it. The only decal mine currently has is on the side of the hood that...

I read this thread with interest, Does any of this pertain to a Grey L1500? Reason I ask is when I bought this gal a couple of months ago, previous owner had the FEL off and the "in and out" lines connected together, and the brush hog on it. I do not see any thing like the photo in the...

OMG, I want one, I guess it CAN NOT be added to an existing trans?

What do you want to paint, are you sure its Grey? / Not Blue? ................ From Vic's Article on Kubota Paint Orange Enamel spray can 70000-73710 fenders, hood, instrument panel and wheels 5 cans for B series 6 cans for L series Bright Orange II spray can 70000-73713 fenders, hood...

I have recently started to look into a leak at the control valve assembly on an old Great Bend M-10 Loader. The manual I have is not the same as far as the control valve I have. It is currently and was leaking without any pressure, leaking less after the o-ring replacement. If anyone sees any...

I just did mine (L1500 DT), a first for me, hell my first tractor. I did it with the FEL (front end loader) attached, was not sure how it would work out. Turned out it was perfectly balanced, I have two Harbor Freight car dollies under the loader and can roll her around using them and the front...

I am re-creating the sicker / decal on my alternator L1500 DT, the problem is I can not read all the information, Tooljunkie posted a pic of his decal but it is different in shape and information I think. If any one has a rectangular decal on their alternator and can read the information it...

Here are some measurements.......... Let me know if you do, and cost, etc. YES, everything is dipped in GOLD, I am finding out, probably going to Cypress for my main shaft, gear and bearing cover!

My air filter housing is missing a part, it's a L1500 according to my parts list for it, a L175, L225 and a L185 they all show the ring with the thumb screw but that is not what mine has. Does anyone have a model with this type of housing canister closure? If so what model do you have and or do...