Search results

Are you talking high pressure, or high flow? Do you have selectable flow rates to your auxiliaries? Do you have flow specs of your machine and flow specs of your mulcher?

Re: M4500 Oil Pressure Issues? Will be interesting to find out if it has dropped a screw from the end of the cam, or if it something else. I can't recall reading about any screws coming out, but I haven't been here long. Personally, if it's low enough for the oil lamp to come on at idle, it's...

Yikes....!

Here is some extra info on his tractor from a couple of years ago, nice unit by the looks of it, just out of the box! http://www.orangetractortalks.com/forums/showthread.php?t=25905

This style of pump has been used in various situations for additional cooling or heat transfer for heater cores etc. It may be a bit smaller or offer different mounting if you are going that way https://www.ebay.com/itm/182859678085

Check your PM's

Whilst NIW and others will fine tune your direction for good and bad models, something to consider is age. When you buy old, it generally means a little bit more maintenance/repairs along the way, and getting parts for older tractors can be difficult as companies reduce their parts inventory. So...

Re: LA 68O CYLINDER Rebuild Piece of pipe tight! Mine is 120 # boom and 180# bucket, 421 loader. Hopefully someone will chime in if they have a WSM

Dual traction, i.e. 4wd

I don't have a manual but I would expect the possibility of one at each rear axle, one at transmission, one at mid pto housing. Dependent on design, transmission may drain through mid pto low point.

What parts are you chasing for it? https://www.colemanequip.com/search/K2561-16600%20/

20 hours after rebuild if documented and done by dealer, speak to the dealer.

Hopefully this little sucker (010) and not the pump shaft, or something else!! https://www.messicks.com/part/T1062-36820/gear-17

WSM here http://www.kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/&file=L3130%20-%205030%20WSM.pdf

First thought without looking at manuals, hydraulic pump, or hydraulic drive shaft/spline. IIRC, this model runs everything from this pump, including HST. EDIT: Just noticed yours is GST, but appears to be similar.

This could be like a "which oil thread"! Park on concrete, measure from ground to top of rim, measure rim diameter, take half of rim diameter from first height. Multiply x 2 then result by 3.14159

Hopefully a member has a manual squirreled away somewhere. I'm guessing you'll have some fun, this Model 24 (B211) payload 350lbs may have been an ARPS http://www.orangetractortalks.com/forums/showpost.php?p=293854&postcount=2 Other references around the net show a B6000 with an ARPS B206...

http://www.orangetractortalks.com/forums/showpost.php?p=208087&postcount=2 http://www.kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/

SUPER UDT in Transmission, Rear axle case, Mower gear case per the manual

Forks and others https://www.tractorbynet.com/forums/files/kubota-buying-pricing/391143d1411172913-forks-foe-bx25d-img_3503-jpg https://earthandturfattachments.com/wp-content/uploads/2016/08/kubota-552.jpg