Search results

Some manuals here, may have pics, you'll have to peruse http://kubotabooks.com/AutoIndex/index.php?dir=Tractor%20Owners%20Manuals/

It was made in/for a foreign country/market

Probably what you distilled from the turnips gives that effect!

Even though your cutter works on the other tractor, check for any play/movement in the universal joint on the PTO coupling, if there is any, replace the universal joint. When the uni wears, they can throw out of balance and transfer this out of balance to the shaft and bearing. This may not have...

Check the new one, it's probably A JIS head (similar to a pozidriv) not a phillips head, so using the wrong tool stuffs it. (Very common!)

What happens when you bridge/jumper the main positive battery lead on the starter motor to the starter motor solenoid spade connector? Does the engine crank at full speed. NOTE: Ensure tractor transmission is in neutral, park brake on and wheels chocked.

Since it's scientifically proven by a double blind trial it should surely pass the muster here?

Each to their own, but I doubt you'll save $800 in fuel and engine wear over many years if you use your generator a couple of times a year.

Only about 10 characters out eh! I've sent him a wsm to peruse.

While you have it in the air, do the usual check for wheel bearing play, tierod/steering/cylinder play, and measure your toe-in and check to specification. 2~8mm from this book if it suits https://www.manualslib.com/manual/1093091/Wsm-M7060.html

If they aren't powered it's probably easier to run a new fused feed to your own fuse block for additional circuits, unless you wish to chase up the fuse link connectors if it doesn't have them and add additional feeds to the main block which may be difficult.

Glad the manuals were of assistance and happy you got it repaired.

Think of an AWD SUV In AWD, drive goes to all 4 wheels, but there is an open differential between each front wheel and each rear wheel and another in the center between front and rear axles. Due to differential action the wheels can rotate at different speeds. When you select 4WD, you lock the...

If you add a hoe with it's own pump, it's likely the pump will be sized for the hoe, and your PTO will easily power it. Your machine is rated at 7.3gpm, which is plenty to run a small hoe, a B21 or B26 are 7 gpm rated. If you add a hoe, a subframe is highly recommended. Your remotes should...

Re: 2016 BX 1870-1 for sale I'm not buying but others may be interested in a selling price.

I'd recommend using OEM HST filter, the rest of them is like any "which oil" debate, but don't skimp on the HST.

Save your time and fuel and throw an aftermarket starter on it from ebay for $90, unless you have time and money and like sticking with OEM good stuff. Problem is no one keeps parts for most small stuff these days as it's not economical to repair.

I wouldn't expect a major difference from the 12 speed of ~40Km/h https://kubota.ca/getmedia/790bd15b-73f8-4fe9-8f37-bcf61b4819da/M60-ENG?ext=.pdf

Tip No.1. Don't replace the pump until you pressure check the system, change filters and check for suction leaks. There is a workshop manual available for download https://www.manualslib.com/manual/1069659/Kubota-M6800s.html#product-M9000

There is a combined L3200/L3800 available here https://www.messicks.com/part/9y121-05200/wsm-l3200-l380 but there is an L3200 manual here for download, it may not have your engine in it but I expect a lot of the manual will be the same, but you would have to check...