Search results

Anytime you move from a Halogen to LED you will have improved lighting. The LEDs made a nice improvement. it’s like going from a 12v incandescent to a Halogen in the 80s

That’s Synthetic

Super UDT is synthetic. Look at the jug.

they worked great. Plug and play. See my pictures in the above post.

Yes those are the same as on my B2650

Installed my LEDs today, plug and play. Took about 5 minutes a light once removed.

When I did the 50 hour service on my B2650 I switched to a synthetic 75-90w in the front as my 2016 BX developed front axle pivot leaks at 160 hours with the Super UDT. Messicks posted a video on YouTube that they switch all tractors out with gear oil when they come in for service.

If you have a Kubota, you are using Synthetic oils. The UDT is Synthetic.🤓

After 6.5 weeks at the dealer and a new oil pan, I still have the same oil leak. I mentioned to the service writer it seemed the oil Was coming from the front engine cover. A $25 gasket. Now they have to tear the tractor apart again. This time there lending me a free loaner with a blower while...

I’m replacing my B2650 front lamps with LEDs tomorrow. My work lights have 2 screws on the back holding the lens in. I will use the OEM plug from the OEM halogen bulb to connect to the new LEDs.

The dealer is replacing my oil pan. I’m assuming it was warped? I’m hopeful I’ll see it this week.

You are correct, it’s Grey or ultra Grey sealant.

I never had to add to it yet, but I didn’t want it to get that far.

It’s in for the repair now. they've had the tractor going on 4 weeks next Monday. The front of the tractor needs to be disassembled somewhat to remove the pan. That’s a good point on the stamping of the pans.

The oil pan is sealed Using RVT. The front engine case does use some type of gasket.

Was new in December.

Stopped by the dealer today to see if they looked at my tractor yet. After almost 3 weeks they said I’m the next one in line. They had 2 used tractors like mine for sale with the same leak. That’s the 3rd one not including mine that leaks oil from the oil pan area that I’ve seen..

I did try this early on. No luck.

My 2650 developed a oil leak last May at around 50-60 hours. I’ve cleaned it up and it comes back after about an hour of run time. I brought it in a week ago. Anyone have this oil leak like this? The oil filter is not the issue. A friend has the same tractor with more hours with the same leak...

I spoke to Woodmax last summer when I was on the market, They are now built here in the U.S. They moved the Manufacturing from China to the states.