Search results

Not sure if the B series varies from the BX series, but the BX has a dip stick on the left side as your sitting on it. The BX book calls for 80w-90 or Super UTD fluid.

I’ve had this happen on other forums also. My fix is to rotate the picture on your mobile divice save it and then rotate it back to the upright position and save it again before you upload the picture to the forum.

Do you receive a monthly water and sewer bill? Do you have a water meter in the crawspace or basement?

Turned out nice. I had a new ballast box in my truck on Saturday at the dealer and then decided on the 48” box blade. It works great so far for ballast weight. So I figured the extra money spent is worth it as it serves 2 purposes.

I would stop back down there with the tractor or at least pictures. I personally don’t buy anything that I’m not looking at in person.

On the bottom of the BX expansion tank is where the line comes from the top of the radiator. The line on the cap of the expansion tank is for over flow out of the tank only. Coolant flows back and fourth from the radiator to the expansion tank. (Via the bottom hose) This is the same system...

Great site! I checked mine with a bright flash light and it was obvious mine was only partially open. I took a 11/16 (I believe) drill bit, by hand and spun it until I seen it come to the bottom side. Very very easy to do by hand. Do not use any type of power tool. Like stated above you will...