Search results

Do you add any water pump lube/rust preventer to your radiator after a flush?

It is time for me to clean/flush my radiator on my M7060. What is the best product to use for the clean and flush?

Has anybody tried a wicked tooth bar? They look impressive.

When are you supposed to change the oil in your bush hog? I have a bush hog 3308 and it does not mention it in the manual ( or I overlooked it)

Does anybody know if their is a company that makes aftermarket seat belts for Kubota tractors? My seat belt tightens with every bump I hit and is a pain in the ass but I know you got to wear one in a cab tractor. I want one that works like the one in my truck. thanks

Thanks. I am trying to find out the OHM rating of the factory radio so I can get the right speakers.

The speakers in my m7060 are about to go. Has anybody ever replaced their speakers with aftermarket units that are better? I am not looking for Bose surround sound just something that is clear on the higher volumes you need to listen to pod casts/phone calls while running the machine. thanks

Where is the cylinder located? Is it up front on the axle? I assume you would have to replace it vs repair it? I don’t have the capabilities to rebuild a cylinder.

I have the wide tires also. I Grease the pivot point religiously. I took the screw out yesterday to make sure it was full of grease. Do I need to screw the adjustment screw all the way in before I tighten the set screw?

I have a 2017 M7060 that I bought new. I noticed the last few times I used it the steering was mushy. Can really describe it except it is not smooth. Everything else is fine and machine has been serviced. I don’t notice any leaks. Any ideas? I got the machine new. Cab tractor 4x4 with 12...

I have a 7060 and I run a tuffline hd 20-22 8 foot disk. It is 3 point hitch. If I had it to do over I would buy a bigger pull type plow. My dirt gets hard and sometimes the disk I have will not bust through. Get the heaviest one you can handle and it will save you a lot of time. I have a 12...

I have a 15 year old Bushhog brand 8 foot heavy duty cutter with the semi mount. Good working condition. Does anybody have an idea of what this is worth? I am thinking of upgrading to a new and bigger unit. A new one is $6,000 Thanks

I used to sell komatsu equipment. Watching 2 or 3 d475’s slot dozing with the big carry blades is pretty impressive.

I called the radio manufacturer and they told me 9364 which got it going.

It is an REI CD-5000 radio. It recognizes my phone but I can’t figure out the pin. Tried all of the generic codes ( 0000, 00000, 1111, 1234, etc)

The radio in my m7060 is asking for a PIN number to connect to my phones Bluetooth. Does anybody know the factory PIN number? Sorry for the sorry dumb ass question but I am not getting any fm stations where I am today.

I am helping a friend do the 50 hour maintenance on his new mx5200 hst and I can’t find the dipstick got the hydraulic fluid to save my life. It is a rops tractor. Any help would be appreciated

I got it figured out. It is a 6-6 lug pattern but the old wheel has 12 holes. The new wheels I bought just have 6. These wheels are not made to run duals.

I am trying to measure the old wheel so I order the proper new wheel. I have never done this before and the wheel has 12 holes but only uses 6 on the plow.

I have a Forrest city do all that needs some new rims. The rims that are on the plow now are 12 lug 15 inch but the axles only have 6 lugs on them. I have been running 235/75 r15 tires for years. How do I measure this wheel? Can I just measure it using the 6 lugs used. Thanks