Search results

on my other lists such as cast boolits and gunnutz, the differant catagorys have stickies on top of the page and they stay there. for example, what is the max weight for a rototiller, my tractor won,t start, ect these should be answered and stickied on top of the page. there are lots more of...

thanks Carl. those are the ones. now how do u make all the newbies read theses??? theres lots of real good info there. Louis

Vic, what happened to all the great articles and service tips, eg, the steering box, ect. this was this was on the left of the home page where amazon is now. thanksLouis

hi Oklahoma, if that is u behind the tractor, u could pass as my brother. i would recomend that u read all the posts on the steering box problems and take yours apart and fix it before it breakes as there are no more parts availible. service dept vic( SDV) has after market reverse gears at 1/4...

as Vic says, el bo. after it,s cleaned up and shiny again, apply NYALIC. clear coat. do a google search. expensive BUT AAFAIC it,s the best. it,s uv cured, it will not yellow, flake, or peel off.

this sounds like this has happened in the winter and your crank case vent is freezeing up when the temp dew point are just right this is just a S.W.A.G. on my part Louis

SD Vic. thanks, i just used oil impregnated oillight bushings that u get at tractor suply places and industrial supply. $2 . the might be availible in metric sizes, i never checked. i had 3/4 in on hand and i just made the adapter sleave about 5 thou smaller which shrunk the bore just right...

for everybody that has a used kubota, this thread should be read between the lines. don,t wait until the steering box fails, take it apart and check. the rubber top bushing is a joke, the rubber shaveings plug the bottom drain hole and goodby steering box. i suggest makeing a brass bushing...

do a google search on ** how to remove scratches on airplane winsheild** i,m talking about plexiglass and the sand the scratch out with prgessively finner grit and and lots of elbow grease and polishing compound and back to optical clear.

if the tank used to be clear enough to see the fuel level when new, u should be able to use 600 up to 1000 grit sand paper on the inside and outside. the will no give u optical clarity, but u should be able to see the fuel level. another option is to drill 2 holes on the vissible side of the...

u must be a young fellow.LOL yes lawn tractors, outboard tanks, aircraft, model t fords, ect had them. that was before the elevtronic age. the L series of bota,s have a hole in the hood so u can fuel up without opening the hood. make a hole in your hood. as a side note, if y have rust in your...

SDVic; u are correct when u say u need a opencenter valve when u add this to your bota. however i fail to see how a straight open center valve without the power beyond adapter would work. without the power beyond adapter, u would only get pressure in your aux valve is when the 3PT lever is in...

u could find the fuel gauge thats built in the tank cap.

your on the right track, u know the old saying, u can,t have all male pups!!! :D Louis

take the packing out , reassemble with the piston rod in place and use oil when assembleing. Louis

do a search of my posts back a ways. how i changed my reverse gear in my L1500. the gear don,t have to be worn much to jump out of gear. IMHO, it,s a design flaw. no don,t try to bend the shifter forks. u take careful messurements and u will see why Louis

there was a thread a while back where someone made a adapter plate for a mixed marrige steering box. that could be another option when caught between a rock and a hard place. Louis

hey u asked. the devil made me do it. your wife got u sleeping in the dog house??:D LOL

a good deisel mecanich to check your work.:D

i fixed the PTO lever today. i made a slideing extention out of an old gun barrel. milled a slot in it, welded a ball bearing on the end. i installed it with the slot down for obvious reasons and ther is a spring and washer and a drop of locktite on the bolt. it shifts fine now. i have the slot...