Search results

I found this on Ebay https://www.ebay.com/itm/143310170160?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=L5PECCLAQQK&sssrc=2047675&ssuid=ewDEurueSDS&widget_ver=artemis&media=COPY Have you tried any of these? https://www.wengers.com/agriculture/tractor-parts/kubota.html...

That's a real nice set up. My two diesel-eaters don't use a lot, but I usually have about 15-20 gallons in a tank that's stored in my tractor barn. I've not had an issue with storage maybe 6 mo to a year before being topped off after project work. I have a desiccant filter that I recharge...

It's not very clear to me exactly what happened. I'm not sure if you're saying the engine wont turn with the starter or the engine wont turn even if you bar it. Are you able to tell where The noise you heard came from? The L35 has a hook that will keep the clutch pedal in (NOT ENGAGED) Have...

Hi @wilktech Thanks for asking however the roof was sold yesterday evening. I hope you are able to find one.

Yes, I'd like to hear what others say as well. I've found the same to be true of most machines - that is the OEM spec is "close", The examples you give though are rather far off from my experience. For oils, I use it as a guide to know about how much I should have on hand for a change. Then I...

Thanks @whitetiger - great info to have

Have you seen this site? Maybe one of their roofs would work - the soft tops are much more affordable than the hard tops. Cutting the one I'm selling might not look very good. https://www.everythingkubotartv.com/search.php?search_query=rtv900+roof

Thanks! That's what I missed being in a hurry. $200

This is the black plastic roof used on a Kubota RTV1140CPX. Likely this roof will fit other brands/models of RTV/ATV but check the sizes below. The REAR of the roof is slightly wider than the FRONT. Overall Length = 80" (6.6 Feet) Rear Width = 61" (4.4 Feet) Front Width = 53" (5 Feet) The...

Hi Jay, Yes that is a possibility, however the plug was definitely bad.

The other day I removed my injectors from the RTV for testing (more on that later). After replacing them and spilling a little fuel on the glow plugs from priming the system, I noticed some bubbles on a glow plug below where it connects to the electrical buss. Obviously there is a seal failure...

That's a good one. When I was restoring my RTV1140CPX, I had an old flasher and after installing hazard flashers and turn signals, the flasher would work sometimes, and other times it would take "warm up" time to work. All the while making "squeaking" noises. Yeah, I went 'round checking...

Kudos Dan! An excellent machinist too!

The second you turn the Ign on you should hear a loud click. That's the Engine Stop solenoid pulling the injector pump rack to open/idle. If you don't hear it, then check fuses. Check the solenoid connector for 12V. My solenoid went bad *poof* all of a sudden without a warning. Yes one of the...

Great! I'd like to hear more as you dig in! Goodluck

Yep - right here for the OPS manual. https://www.kubotabooks.com/AutoIndex/index.php?dir=Utility%20Vehicles/ The 900 WSM might help you - maybe someone here has one.

Many times you can find things on ebay. Kindly see the photo below. I'm not sure what parts you are referring to however. See the photo from Messicks below also

Here's a video I thought y'all might like. The guy on the left is "The Motor Oil Geek" (another youtube channel). His stuff is great but I confess, I don't pretend to understand everything. This video however talks about journal bearings and provides some good knowledge. I wanted to run out and...

What do the journals and other side of the bearings look like?

There's a few ways to do this involving Oxy torch and chains. You have to heat up the bent portion (I assume it's supposed to be straight?) and rig up something to unbend. A much easier way might be to have a welder simply replace the bent portion. That's just a square tube and a fairly easy...