Search results

I have a b7100 with mid mount 60 inch. I give mine full throttle then back off to about 3/4 throttle. I do not have a tack on mine.handy

I understand that.That is why I decided to leave the road when with boilermakers and pipefitters.handy

Eric glad your back I was wandering what happened. Really glad you got a job not any FUN not having one. If you ever run thru my neck of the woods let me know I will watch for you and dont:D blow the 4 air horns at me. handy

Know what I would do . I would get a tamping stick and hit the bottom of post hole until it was solid again then she would think you really worked hard cleaning the dirt out.:) Then tell her all that cleaning was real hard work.handy

Carl like your pics you and kuno thats fun to see. Looks like a nice size tree also. I agree with dusty. I believe you know what you are doing when moving and replanting trees.:D Hurrah for you and kuno. You did good. handy

If this has the original radiator cap try replacing it. That may work hopefully. If not you can take radiator hoses off and take thermostat out and backflush the engine block and radiator both. I would change rad. cap first make sure it has 50/50 water and antifreeze or it will heat up if not...

Welcome to the forum with your L245 you are definately at the right place. handy

Thanks for update glad you got it fixed. Hope coolant was mixed 50/50 coolant and water.handy

:D yep proud of this site myself and all members on it. handy

Thanks for telling us what you decided. I will remember Tag for future. handy

;)eserv I have to say you are a honest man from your answer and I DO NOT mean any disrespect at all. handy

eserv I have went to starter and generator (alternator) rebuild shops and crossed some of those over. We have several of those shops in Tennessee. They dont care at all to check for you as long as you buy from them. Just an idea. Worked for me in past. handy

Josh glad you got it fixed . I beleive in welding or spot welding myself as one man said on one thread maybe this one:D if I broke my toe I would try to weld it back on. I would run that deck like that until I had to do something else to it. I am like you about those idler pulley shafts. I made...

Thanks for jumping in Vic you are exactly right he does need to replace all while at it.handy

Josh cant you put a washer on the bolt then drill a hole thru bolt above washer put a carter key thru the bolt above washer and a done deal? Hope I am clear with description. I have done that on a lot of things over the years and I have several of them and they are still holding up . Looks like...

Jwb I nearly forgot about that one. remember the first I tried got out of freezer and waited to long to put them in. The 2nd time I knew exactly what I was going to do quick as I got them out freezer popped right in and sealed. Never did leak kept truck 4-5 years. handy

If you put a freeze plug in freezer it will shrink it enough to go in hole as it gets warmer it will seal itself(expand). Any way that is a trick ive been doing the past 45 years worked for me. handy

bulldog have you looked at http://www.colemanequip.com/TeethAndEdges.asp handy

Make sure battery terminals are not wired up backwards. If wired correct make sure terminals are CLEAN if clean take battery off and take to advance or napa and have it tested just because it test 12 volts with multimeter does not mean its good. If battery test good have starter tested at same...

Skeets what kind of grinder do you use bench or side. I use bench never used jig and it is a trick to it. ;)Most people round ends off without even knowing it until they leave that one strip of grass in the center of 2 or 3 blades. Tell me if you use a bench grinder.handy