Search results

The B2650HSD's key stop solenoid works the opposite of what you're describing. The solenoid receives power during operation to keep the fuel flowing. Only when voltage is removed from the solenoid is when the fuel stops flowing. I know this for a fact as I bought my tractor from an auction as...

This! Do it before you round off the corners using a wrench.

Size. It's much easier to store the small EZ-Jack than the big Gorilla ramp.

Have the bucket on the ground and run the controls through all of the positions with the engine off to relieve the pressure in the lines.

On the B2650, nothing is accessible as the solenoid bolts directly to the block. I'd say the solenoid is working fine as the engine is running. If the solenoid wasn't working, the engine would not be running. I'm thinking its welded shut contacts in the 12V relay supplying the solenoid...

I looked at the manual and it seems that the diagram doesn't match the actual radio. Does the external trim ring come off?

Unfortunately it does nothing to tell you what pitch the threads are.

Functions similar to a shear pin- prevents overtightening and thread damage.

My tractor's been down for 'long-term' repairs (lack of time) but I went out tonight and threw on the shaft. I still need to paint the shaft before final installation.

That particular one goes down to 2-1/4" which is too big. https://sunextools.com/products/13-inch-adjustable-oil-filer-plier/ This one goes down to 1-3/4" and may be in stock at your local Home Depot for you to physically look at before buying. CHANNELLOCK 209...

Just like anything round, you want to grip it with as much force as you can all the way around without squeezing it at only two points. Strap wrench or pliers with round jaws.

This is a Weasler on the left vs Kubota OEM on the right. Spring-Lok yoke Kubota 70060-02803 0.984 (25mm) x 10 splines Weasler 105-0610

The correct answer is- a day later than I should have.

Did you lose the lens cover completely?

How about extending one of the QDs and staggering them?

Any chance there's a low oil switch on the engine and you're just low on oil? Edit- found a couple versions of manuals. Check the cranking fuse if you have one.

I measured my B2650HSDC on R4 tires at 83 1/2" above the lamp eyebrow with all of the air let out of the tires. I was just barely able to sneak through my standard 7' garage door opening.

Do you have a 12v load you can directly connect to the battery to test if the battery is still good? It could be a large 12V light bulb, fan, etc...

Aerodynamics

I really like the Harbor Freight Icon 2100 lumen LED lights. https://www.harborfreight.com/2100-lumen-led-rechargeable-magnetic-compact-floodlight-black-59170.html They're on sale until 10/6 for $40.