Search results

You can see it when the tunnel cover is removed but there isn't enough space to get a hand or tools in there. When the seat and seat plate is removed, you can see the plug but there's too many things in the way to reach it. Your best bet is from below. Rather than moving the pedal then...

Are these the ones you have? I have the same gloves. https://www.amazon.com/SabotHeat-11-1V-Boosted-Heated-Gloves/dp/B0D9NNP4BL

When the area is above freezing when you go to start the snow blowing, isn't the snow going to melt and freeze there as it cools down to ambient temperature?

It's the shop.kubotausa.com site with my local dealer selected. Anything that wasn't in stock was orderable up until a couple days ago. Now anything that isn't in their stock says "Currently unavailable" preventing me from ordering any of those parts.

They've already started locking out the ability to order any non-stock parts.

According to what you just now said- your setup, both chute rotation and deflector, worked in the past. You then said "until now". What has changed from before to now? Was the snow blower chute rotation functional when last disconnected and now not functional since reconnecting it? If so, how...

Taking a guess on the sub model you have. I did a spot check on the other sub models, looks like the washer tank assembly is the same. Do you actually need the whole assembly or just a part of it?

I had to rework my slow-blow fuse holder assembly due to corrosion (zero voltage passthrough whatsoever) so I know all about how the B2650 fuses are in that area. These are the Littelfuse PAL series part numbers used on the cab version of the B2650HSD that I have personally purchased and...

Perhaps the wheel loaders are beefier?

Glad the part number I gave you worked out!

I found what the OP's asking about. K7170 MECHANICAL QUICK COUPLER

I agree. A cylinder being "bad" by outright not functioning is very unlikely. To the OP, have you loosened the fittings at the cylinder itself to verify that it's actually getting fluid at both ports?

Center section of a used plastic full size 8 foot truck bed liner?

A good comprehensive page about the blackout details- https://customer.chartersoftware.com/knowledgeBase/25381744

Surplus Center is one place. A double acting cylinder would work , just need a filter on the upper port. https://www.surpluscenter.com/Air-Pneumatics/Air-Cylinders/Double-Acting-Air-Cylinders/ You could use air shocks for vehicles mounted upside down. Random example-...

When did you try contacting them? During Thanksgiving week? There are Rimguard mobile installers also.

I'm sure someone can fab up gauge wheels attached to gas charged struts or pneumatic cylinders. Simply pressurize the struts/cylinders just enough to lighten the load and you'll still have a bit of float action. Could probably use dock wheels if you want them to be able to skid laterally...

The facility pictured on Triax's site is ZXP Technologies. https://zxptech.com/ Looks like Triax and VP Racing products are coming from the same facility.

I've used Trausch Dynamics to make hoses for me before. https://www.hydraulicstore.com/hac Spee-Dee delivery is an option for those who live in the upper Midwest. Using this as an example-

Go for the green lasers rather than the red lasers.