Hydraulic fittings

[BX2680MR]

Could someone please give me a part # for these hydraulic fittings on this bank. I went to kubota dealer and they can't seem to find them. I need to change the fittings on hydraulic hoses for snowblower so that I can hook them up to that bank or manifold on the tractor. Thanks

 

[MapleLeafFarmer]

is their a number stamped on the fitting?

Princess Auto in Brandon should have what you need.

 

[North Idaho Wolfman]

They are proprietary you will not get a standard fitting to fit up to them.
A couple choices:
Get another quick connector block and hoses to put on the snow blower. (this is what I would do).

Kubota #7J065-85020 COUPLER(QUICK MO

COUPLER(QUICK MO

www.messicks.com

Change the existing connectors to standard couplings.

Advice on this connection....

BX23S My FEL disconnect leak(s) have got bad.... I'm gonna take all the fittings off tomorrow and clean up/ inspect /reassemble... Do these fittings use teflon tape? OR are they tapered? I guess I'll find out when I take it apart... I really can't figure out which of the 4 are...

www.orangetractortalks.com

 

[Dustball]

The part number for the male plug is 7J627-85290.

That just happens to look an awful a lot alike the end of a 7J627-66220 (aka Parker FEM-252-4FP).

The female coupler is 7J626-66320 (aka Parker FEM-251-4FP).

I just happen to be selling both the male and female Parker FEM flat face couplers/plugs on eBay as they're popular with the Chinese mini-excavator folks for their attachments if you're unable to locate these locally.

 

[North Idaho Wolfman]

The part number for the male plug is 7J627-85290.

View attachment 142585

That just happens to look an awful a lot alike the end of a 7J627-66220 (aka Parker FEM-252-4FP).

View attachment 142586

The female coupler is 7J626-66320 (aka Parker FEM-251-4FP).

I just happen to be selling both the male and female Parker FEM flat face couplers/plugs on eBay as they're popular with the Chinese mini-excavator folks for their attachments if you're unable to locate these locally.

Looks are good, but...
Have you coupled the female parker to the male Kubota coupling?

 

[Dustball]

Looks are good, but...
Have you coupled the female parker to the male Kubota coupling?

I don't have his male plug. I provided the Kubota part number for the female coupler if he'd like to try purchasing locally to see if it'd fit.

 

[Kennyd4110]

If it's like the Faster single point coupler they copied, you can use a standard female ISO 16028 'flat face' coupler to connect to the male tip sticking up. Likely 1/4" or 3/8" size.

Top on on this page:

https://www.boltonhooks.com/wp-content/uploads/2020/02/qd_sizechart.pdf

 

[North Idaho Wolfman]

I did a little more digging and Kubota changed that bank of fittings somewhere along the way, so maybe they did end up going to a standard fitting???

 

[BX2680MR]

Thanks for all the replies. The only real definite reply tho was the one saying that my only two options are to get rid of that bank quick attach and just swap all couplers or buy a quick mount coupler for the snowblower. The rest seemed like "try this, try that" https://www.messicks.com/catalogs/kubota/bx23s/pump-motor-system/j21200-hydraulic-pipe-return

Id like to think that I should just order a couple of these and be done with it but it still seems like a guessing game and I'm in the boonies an hour away from any big parts store

 

[TheOldHokie]

Thanks for all the replies. The only real definite reply tho was the one saying that my only two options are to get rid of that bank quick attach and just swap all couplers or buy a quick mount coupler for the snowblower. The rest seemed like "try this, try that" https://www.messicks.com/catalogs/kubota/bx23s/pump-motor-system/j21200-hydraulic-pipe-return

Id like to think that I should just order a couple of these and be done with it but it still seems like a guessing game and I'm in the boonies an hour away from any big parts store

Are you trying to use standard individual female couplers to connect hoses to the male tips on the outlet block?

Dsn

 

[BX2680MR]

And then I climb under there to install this new $500 pto shaft fresh outta the box, and it's too short... just battling here and not getting very far

 

[BX2680MR]

Found 'em

 

[BX2680MR]

And the new tilt and swivel, finally, three weeks later everything works.

 

[Dustball]

Found 'em

Glad the part number I gave you worked out!

 

[John T]

Found 'em

Looks good.

I did the same but used pioneers when I saw the price of the female Flat faced connectors

It works and no leaks, so all is good.