Search results

Cleaning the screen may not be enough. Might spray some cleaner on the radiator on the outside and behind the fan blades. Purple power, or simple green or your favorite, but let it soak for an or so then spray with the garden hose. Careful to not bend the fins. You'll be surprised how much...

Would probably be easier (and absolutely correct angle) if it was welded while attached to an attachment, just so you know it's right! Instead of just taking the quick attach.

Larry, I hate to send you someplace else, but here's where you'll find out more about flail mowers then you ever wanted to know. If you start at the beginning and read it all, you'll be caught up by Christmas...

Prikev, see the grease on the fork in the above picture posted by Motmow? You might try squirting some PB Blaster on the ends of that shaft on both sides and give it a couple of shots for a couple of days. Pump the clutch as you spray (going to need a helper for this). Might reduce the...

What Ramos said! Might soak the part threaded into the cyl with some PB Blaster or similar to help with some of the rust when you go to remove it. Looks like you found it at the bottom of the South China Sea! If you're in a constant corrosive atmosphere, might spray your bare metal components...

Cities near me have codes requiring a percentage of parking spaces to be marked as Handicapped Reserved. At the local Farm and Home Store (which use to be a Wal-Mart) there are 10 spots right next to the doors. In 15 years I have never seen them all full at one time, maybe 3 or 4 vehicles at...

Many folks farmed 40-80 acres with those tractors. They were overbuild work horses. They only got pushed out of the limelight with 4x4 became popular, then the smaller size imports took over.

13 hours from Kokomo, In.....where's that put you nearly to Denver or Dallas? Sometimes you just have to have faith. From what I know North Idaho Wolfman doesn't do drugs, doesn't drink whiskey, doesn't lie....knows Kubotas ....so if nobody pops up and says ya, I got one of those on my g1900...

There you go! Lance to the rescue. And no PM required. Lance do you have a web site or a list of tractor you have you're parting out? I'm just curious. I have an L3250 I promised to a guy just to get it out of my site. It's been abused and has a spun rod bearing. Crankshaft is no good but...

Do a search on this forum. There is a member in Calif who parts out tractors and comes on here frequently letting folks know he has what their looking for. I think he just posted a few days ago he was parting a couple older L's, and for some reason an L345 strikes me as one he had. Went and...

In your pictures, the bottom most nut (2 ea) is the ones you want to loosen. Be sure to have a wrench on the half it tightens onto. You should turn the engine over until you have diesel coming out those lines...without air bubbles in the fuel. The lines on top of the injectors are fuel...

Oak lumber.

The steel lines connecting to the injectors typically requires a 19 mm wrench. Sure you're on the correct line? Do you have your throttle full on? Give about 15 seconds of starter turning, then give the starter a chance go cool off, then repeat. It may take 6-10 attempts. Have to be...

A few years ago I had one of those mowers. Needed a part and went to the local Kubota dealer. Parts guy told me Kubota never made a gas powered push mower. Had quite a discussion with him, but finally another guy came in and finally found the model in their files somewhere.

About a year ago I took my dodge Dakota to the dealer to get the oil changed. I waited, when I got home I checked the oil after the truck set overnight. It was 1 qt. over. I took it back to them and had them remove it. Ya, it was a pain in the butt to drive back to town and wait, but I...

Andy, a way to see how accountable your dealer is would be to call them (talk to the service mgr) and let them know you had them service your tractor and the results you found. Remember Columbo? Act like him, ask questions (like you're dumbfounded). What should I do? How will I get just part...

Dr. I'd suggest go up to Delmar's post where his name is on the upper left corner. On his name left click your mouse, you'll where to send a private message. Send him your address. Go to your previous post and delete it. That way your address won't be posted all over the internet and may...

Live so that you wouldn't be ashamed to sell the family parrot to the town gossip. Will Rogers

Bill, sounds like everyone had a great time. I figured there would be pictures posted that would wear us out looking at them all, but I think everyone was on a photographic diet! Getting away is nice, but I always felt "at ease" when I'm back home! Glad you had a safe trip. Did you find a...

Remember the story about the young girl who asked her mom, while fixing Thanksgiving dinner, why she always cut the ham in half when she put it in the pan. Mom said, I don't know, but mom always did. Daughter was baffled, so she went into the parlor and asked Grandma why she cut the ham in...