Search results

  1. Bulldog

    Noise after transmission oil change

    I know that everybody has their own opinion about lubricants but that is one thing for sure that you get what you pay for. I would rather spend a few dollars more for a top grade oil that save a few bucks for now and then ultimately cost you in the end. Although I always warm my tractors up no...
  2. Bulldog

    B7200 Overhheating Problem

    I know what you mean and I have the same problem at times. Most of the time if you wipe the dip stick clean and then check it it will have oil way up on the side that is facing the engine but if you turn the dip stick over and look at the oil level on the bottom side of the stick it will give...
  3. Bulldog

    Grass catcher?

    It may not be what you want but they do work ok and are fairly cheap. Pull this behind you while you cut the grass and have the discharge going to the inside of your cut. When you get to the center what you haven't already picked up will be in one spot in your yard ready for pickup.
  4. Bulldog

    B2150, B8200 3pt hitch lower lift/pull arm

    The ones on my L 3000 are 27 inches. Hope this helps
  5. Bulldog

    Posthole Conundrum

    A joint project, shop vac, and a man that thinks he's going to win no matter if the wife is right or not. I hope this works out for you but it sounds like this situation has disaster writen all over it.
  6. Bulldog

    B7200 Overhheating Problem

    I would say that handy is all over your problem. I went thru the same thing that you are going thru with my B 7100 and the radiator cap fixed my problem. If you haven't changed the antifreeze lately you should do that as well. Even though antifreeze won't freeze it does loose it's ability to...
  7. Bulldog

    L225DT Hydaulic Fluid Leak

    I'm not sure on your model but my L 3000 has a vent tube on top of the fill cap for the tranny.
  8. Bulldog

    Teeth

    Sam, as far as I know they don't have a web site. They are a small dealership but Ken (the owner) told me that he doesn't want a huge fancy place because all that will do is drive up the overhead and then he can't offer his customers the same deals that he can now. He has been in the same...
  9. Bulldog

    Noise after transmission oil change

    If I was going to bet on it I still think that it is the UDT fluid. All Kubotas come from the factory with Super UDT and the noise wasn't there until after the UDT was installed the noise started. Super UDT is a synthetic blend oil and it is a better grade of oil than the UDT is. I know that...
  10. Bulldog

    L3010HST governor questions.

    Be sure you look at the filter and the fuel that comes out of it. If it has small black specks in it then you will know for sure if you have algea.
  11. Bulldog

    Teeth

    Hi Handy, If you have never talked to these guys before you should give them a try. I order all my filters for both my tractors and the teeth over the phone and they are having them shipped to me and then simply bill me for them. I love going to the dealer in person when I have time to do so...
  12. Bulldog

    B7510 HSD Hydraulics

    It should have a guide rod (kind of under the seat on the right side) that slides thru the lift control and it will have a upper and lower adjustable stop. If I remember correctly it will have a 10mm bolt that when you loosen it then you can slide the stop up and down the guide rod. When you...
  13. Bulldog

    Teeth

    I ended up ordering them from Tag Equ. I contacted several dealers and even found some on Ebay. The ones on Ebay were 2 dollars a piece cheaper but with the shipping the price got jacked up. As far as the dealers go I was disappointed with all of them but Tag. I gave them my Kubota number for...
  14. Bulldog

    L 4310 PTO Problems

    Does the flail mower have a slipper clutch that may be out of adjustment?
  15. Bulldog

    Can you diagnose from a picture? (L2350 wheel)

    Hi SarahJ, The guys at Tag treat their customers like family. They have always went above and beyond to help me out and still continue to do so. I ordered some parts from them yesterday and you couldn't ask for a better group to deal with. Ken is the owner of the dealership (first Kubota dealer...
  16. Bulldog

    engine speed to run woods 6 ft cutter

    Sounds like you must enjoy turkeys and deer. I love them myself.
  17. Bulldog

    engine speed to run woods 6 ft cutter

    Hi Mylo, Your welcome for the info and welcome to OTT as well. You did good to get a Kubota like that for your first one. I started out with a mid 70's B 7100 but that little tractor is what sold me on Kubotas. It didn't have a tach so when I was using the PTO I would just pull the throttle all...
  18. Bulldog

    L3000DT pto noise

    My L 3000 is a 2000 model and it makes a kind of knocking sound as well. I think it has something to do with the throw out bearing or something in the clutch area. Mine doesn't just make this noise when the PTO is in use it will make it all the time even when it's sitting still. When the clutch...
  19. Bulldog

    engine speed to run woods 6 ft cutter

    I'm guessing that you mean that you don't want to run the engine that hard, Is this correct? If this is what you meen I understand your concern. I grew up with IH tractors that had a much lower RPM to get the 540 PTO speed and had to get used to Kubota engines. This may sound strainge but it is...
  20. Bulldog

    New From Wisconsin

    It has been very wet hear this year so far. My wife had to rake one field in 4WD and then when I got there with the baler I had to bale it in 4WD also. My baler was cutting down about 3 or 4 inches while it was moving and when I stopped to tie it would go down about 5 or 6 inches. I'm glad I had...