Search results

Got lucky lol. Was clearing brush and ran over a small stump that managed to get up in between the axle and into the engine compartment. I killed the tractor immediately after the grinding sounds and the shower of hydro fluid. Having already killed two snakes where the tractor was I opted to tow...

On my L with r4s there is no way to swap the wheels side to side, with the off set of the rim is too much to clear the frame.

Happy thanksgiving, only in the low 60s here today ;), I hate winter time

Wasn’t me but guy next to me at work was cutting an exhaust off with a torch, all of a sudden you hear a loud scream,torch goes flying and he bolts to the bathroom, I ran to cut the gas off on the torch. He emerges from the bathroom in pain,piece had burnt thru his pants and underwear and got...

Like what mister said, make sure battery is good, it can show a good surface charge but not have the capacity when you go to crank it. Also check the connection where the ground cable attaches to the frame

Sure sounds like a broken axle, in an open rear end it will spin the wheel with least resistance, that’s why the left one only turns with diff lock engaged.

I’m pretty sure it’s not going to be obd 2. Believe it is a kubota specific hook up and requires the kubota software.

It’s a rcr 1860. Only reasons I was thinking about the tire is 1 they are free lol, and 2 I figured with the steel belts in them they would hold up a lot better then the plain rubber likes what’s on it now.

The rubber belting on the front of my bush hog is ripped up,throws way more debris out the front all over me and the tractor. I’ve been thinking about grabbing some used tires from work and cutting them up to fit. I’m thinking they will hold up much better then the original belting (it is a land...

Hope the beer is back in the budget now! Lol

My 2 cents, my L3200 is gear drive (it’s the series before the 2501), have no experience with hst. Only time I’ve wished I had the hst is bush hogging with lots of forward to reverse changes, with a gear drive the pto will cut out for a second while shifting. Is it a big deal? Maybe, maybe not...

Rolled over 200 hrs today Had the project foreman’s with me,if they ain’t on the tractor they gotta be right beside it Sent from my iPhone using Tapatalk

Are the batteries you get at a kubota dealer the same ones that come in it from the factory? I ask because I am also a Mazda tech as well, they come from Japan with Panasonic batteries in them, replacement batteries come from our local interstate dealer and they just put Mazda stickers on them...

Still have the original in my 13 L3200. Still starts fine. Are you having a problem with yours or just getting prepared?

From your first post I thought we were fixing to start a go fund me page for your fluid changes lol, just playing

I noticed same thing with mine. Changed the hydraulic fluid at 150 hrs, mine is a gear tractor so I don’t know about the hst whine but it does have normal gear noise which has been diminished and the pto was very loud when engaged almost to the point I thought I had something wrong. After the...

I’m not sure on the m series but on the L series you turn the key to the left to turn the glow plugs on before cranking.

My favorite customer/sales person fail was back in 2005 when ford brought back the ford gt. I lived in Wisconsin at the time. Couple comes in in a rags to riches story, they started their business and were very successful in a short bit of time. Well they had money to burn and had to have the...

I know what you mean. I hate more that we as technicians have to teach the customer what they mean and do, should be the job of the sales person that sold it to show the customer how to use what they bought.