Search results

The Ford OEM couplers on the 6640 tractor were Snap-tite 6800 series and the 1/2" body size interchanges with a standard ISO 5675 coupler. Same plug that fits your Kubota will fit them. Dan

The OEM plugs for the Kubita remotes are made specifically for their block mounted ciuplers and are nicer than a generic rubber plug. Dzn

As you have discovered a dust plug for a 1/2" coupler is way bigger than 1/2" in diameter.. The labeling on your box and/or what was actually inside it is very suspect. Dan

Clevus is in Michigan. I doubt he/she gives a :poop: what the POCO rules andcregulations are in Canada. Dan

You will benefit significantly from a larger machine. Thats a no brainer. I am not going to speculate on how much bigger will be best/better for you. The 3pt and SSQA attachments will work just as well on the larger machine but you need to be mindfull you have more power and need to avoid...

The couplers are 1/2" ISO 5675 and they should have come with OEM plugs. That is the body size of the coupler not the physical diameter of the plug. How did you determine the plugs you have are 1/2" ? Dan

Thats the inlet pressure relief. Different valves use different types. It looks like its a cartridge type relief but might be anything. Have you tried tightening it up? Dan

I do know that on that implement the cylinder is not going to be the source of drift in the clamping arms. Dan

But not in the cylinder. Dan

Spool leakage in the control valve. 🤔 I have been wondering if this might be the "does not work" problem since reading the original post blaming the cylinder. Dan

Since we dont know what the actual "it does not work" problem is thats not conclusive What if the problem is the jaws will open and grab the bale but they quickly loose their grip during transport and he is chaining them closed to maintain the grip? Who do we blame in that scenario? Dan

Run off by all of the haters. Dan

Pehaps you should take two minutes to actually check before you think in public. Titan has three offerings, economy, standard, and pro. I purchased the standard duty and they are more capable than the LA525 loader they are used on. The Pro model would be a waste of money and added weight the...

Think about that for a second. Two 1/2-13 grade 5 bolts lubed snd tightened to 55 lb-ft are producing somewhere around 16000 to 18000 pounds of clamping force. As long as the weights are in solid contact with the wheel they are going nowhere. That said I think the idea of moving one of the...

The proof load rating for 2 x 1 /2" grade 5 bolts is 12 tons. If set at 180 degrees I dont think 350 pounds of weights is a concern Dan

The Wolf and I lhink that looks great. Dan Dan

OK model number explained. You have also confirmef the vslve is in fact DA. Did you connect the gauge to port B that I circled to see what pressure you get with the banjo connected? Is that rear outlet assembly a bolt on to the "normal" set of pipes? Dan

He does not trouble shoot things under warranty. :rolleyes: Dan

In the last 3 years I have actually purchased two items from Titan. One was an SSQA adapter plate and the other was SSQA pallet forks. Both times delivery was very quick and the quality was quite acceptable. Maybe I am just lucky but I would not hesitate to buy again. Dan

I had to go back and reread the entire thread to get caught up. I now understand what you are trying to dop but we have multiple "outlet blocks in youtr dagram. After considerable head scratching it appears the B port on the control valve is connected to the plug on the rear outl;et block...