Titan Attachments Buyer Beware!

[John T]

Pehaps you should take two minutes to actually check before you think in public.

No Way jose... thats no fun.

for winter plow I cut down an old fisher plow.... the backside (top) has a nice angle that works just about perfect for the upper SSQA connection.... for the lower pins, I welded small brackets for the pins to lock into.

No springs, it's just the plow blade.... it works pretty dang well in Float mode... you can also use down pressure to back blade

also by being so close to the loader arms it is a little more compact.

patent pending so don't get any wild idears....

 

[TheOldHokie]

I'm wondering if the OP has another attachment that uses his '3rd function' ? If so does THAT work ?
If is does, then the baler's got a problem
if it doesn't, then 3rd function has a problem.

Since we dont know what the actual "it does not work" problem is thats not conclusive

What if the problem is the jaws will open and grab the bale but they quickly loose their grip during transport and he is chaining them closed to maintain the grip?

Who do we blame in that scenario?

Dan

 

[Mrlunchbox]

Since we dont know what the actual "it does not work" problem is thats not conclusive

What if the problem is the jaws will open and grab the bale but they quickly loose their grip during transport and he is chaining them closed to maintain the grip?

Who do we blame in that scenario?

Dan

Operator error

 

[TheOldHokie]

Operator error

Spool leakage in the control valve.

I have been wondering if this might be the "does not work" problem since reading the original post blaming the cylinder.

Dan

 

[Mrlunchbox]

Spool leakage in the control valve.

I have been wondering if this might be the "does not work" problem since reading the original post blaming the cylinder.

Dan

Actually, bleed by would make sense...

 

[TheOldHokie]

Actually, bleed by would make sense...

But not in the cylinder.

Dan

 

[Mrlunchbox]

But not in the cylinder.

Dan

Yes, sorry. Doubt the cylinder but ya never know.

 

[TheOldHokie]

Yes, sorry. Doubt the cylinder but ya never know.

I do know that on that implement the cylinder is not going to be the source of drift in the clamping arms.

Dan