Search results

For something like thst chipper a length of bar with two drilled holes is cheap and easy. Dan

Not killervexpensive. About $100 for two fittings but they are very application specific. He would have to identify exactly what type hose he is repairing - e.g. R1, R2, or something a bit more exotic ... Dan

Power steering pressure is typically around 1200 PSI. On a tractor that size it might be a little lower. Do yourself a favor and replace the hose. Dan

From the new KUBOTAUSA website. Looks like something north of $5K for KOBD license + scan tool and Messicks still says dealers only. https://www.kubotausa.com/parts-service Dan

Its a pretty wide mower but dead flat field and low grass should be OK. Dont expect to mow high grass on a hillside without some struggles. Dsn

On a system like that its easy to watch the flow. Remove the tank return and hold it over the tank filler with the engine running. Dan

Check the position of any remote valves and the 3pt control. If they are not in neutral they will block the loader valve. Dan

You have a 20 micron filter on it now ? Dan

They are gear pumps and not rebuildable. I think I would be checking suction side strainers and filters.... Dan

Does not seem likely. Dan

00 PS pressure test AFTER the valve. If thats good check the flow rate. Dan

My first thought is a worn out clutch. Dan

This is an artifact of the way Kubota designs their loader valves. The lift circuit on many Kubota loader valves do not send cylinder exhaust oil to tank. They route it to the power beyond port which puts the lift cylinders in series with all downstream devices. With your remotes shifted out...

Pretty common and simple. Hot oil is less viscous than cold oil. That means it requires tighter clearances to generate hydraulic pressure. Based on the fact that all of your systems exhibit a problem suspect #1 is your hydraulic pump. Its likely worn out and loosing pressure when the oil heats...

I am not a youtube star making sales videos. Just a guy actually using a 3pt splitter for 20 plus years and reporting real life results. You dont need bungees to hold valves open or expensive plumbing if you know anything about compact tractor hydraulics. That's a pure strawman argument. A $30...

I guess your research did not include the performance data and video I provided. Dan

Just for giggles what does the end cover look like? Dan

Just FYI If the drift stops or slows down some/all of the leakage is through the position control valve. If no change the lift cylinder is indicated. Lift cylinder is a lot easier to fix. Dan

My curiosity was too much to resist so I purchased a copy of the WSM. Here is the lift system circuit diagram. The diagram appears to be a vanilla open center system with the remote valve stack ahead of the 3pt lift and that matches the text description. I will be damned if I can see how that...

Yes and my reccomendation: A) Mount your T&T valve to a location of your choice on the tractor B) Disconnect the supply coming to the backhoe outlet coupler and reroute it to the inlet on your T&T valve using new hose as needed. C) Run a new hose from power beyond port on T&T valve to the...