Search results

hello, i have a kubota b2100, and i currently ( a few months back ) purchased a titan gear driven rotary tiller ( 4 ft model ), as well as a titan 4 ft box blade, i say as long as you stay at or under 4ft on attachments ?, any one '' should '' fit your needs. i have not looked up the specs for...

i will get this mailed to ya as soon as i can get to the post office.

yeah..not sure why he posted his address to the world ?..lol.

buy the parts, replace bad parts, fix it yourself. anytime you talk to a dealer ?, they will high dollar you a ton !. keep in mind, any parts for a hydro system...let alone for a kubota is going to cost you a few thousand dollars in parts. i just fixed my b2100 4wd, hydro, parts for the hydro...

I cross my chains when i pull any trailer, will it keep the trailer off the ground if it comes unhooked ?, maybe..maybe not ?, from what i personally have noticed is no..it will not keep it off the ground if chains are crossed..or straight. unless the chains are so short, that would stop the...

if you are in the states ?, send me your adddress, i'll send it to you, you just pay shipping..and its all yours :-).

i have just one pic of my 4ft titan box blade. yes, you are correct, its not titan attachments, its titan implements.

you are welcome :-). i bought a titan 4ft box blade local, it came with 3 shanks, have not used it yet ?, but i could not pass on the price, and it being in stock locally.

i can tell you right now, everything attachments does not have any box blades, at least not until sept from what they told me a week ago ?!.

I went with the 4ft titan forward rotation for my b2100 hydro,4wd. the pto hp was right there at the rated hp for the tiller, with it being a hydro, 21 hp engine ?, i needed all the '' push '' i could get to not stall the tractor. one thing i did learn real fast was: how important it is to see a...

MMM= mid mount mower, SSQA=skid steer quick attachment.

i spoke to half a dozen dealers..including a kubota dealer near me ( where i purchased my repair parts ), and they all agreed i would be fine with nothing bigger than a 4ft tiller. service specs calls for a 42inch rotary tiller ?, but finding a good name brand tiller in this width is slim to...

thank you for the info !. you are deff right about the tiller when it gets packed full of mud !, i did not even think about that at all. my b2100 has no problem lifting this titan 4ft rotary tiller, and it is forward rotation, i did take that in to consideration for such a low hp ( 21 hp-16 hp @...

haha..i don't have a cat. i work on a lot of atv's, and it was the best method for draining oil from them.

i had to cut the pto shaft for my titan tiller to fit my kubota, very simple process, spec when i have never cut a pto shaft, let alone owned a tractor until i purchased this b2100. all pto shafts will be a factory length, you may..or may not have to cut the pto shaft to fit which ever tiller...

if its anything like the b2100 model ?, the only way you can access the u-joint to the drive shaft that operates the front end, is by removing the frame from the rear front end at the transaxle, or !, if you have a access hole under the back end of the frame ( although i don't think you can even...

i use a litter box when working on draining my atv's oil i work on, used it on my b2100 as well, holds a good amount fluid. no matter what you use ?, just always be ready to swap them out with an empty bucket of some sort !.

update on the charging light issue: swapped out the reg/rec with a new one from ebay, cranked her up at idle, NO MORE DASH CHARGE LIGHT !. so it was the reg/rec that was bad.

I have a RCK60-24B ''mmm'' ( belly mower ) pto drive for sale. it was mounted to my b2100, 4wd hydrostat. it will come with all hardware ( brackets ) to mount back on your tractor, not sure what all models it will fit ?, maybe fit the b2400 model as well ?. also comes with the drive shaft. looks...

i saved a few hundred bucks, bought this 4 ft titan, also got a 4ft titan box blade at same time.