Search results

I believe they are referring to where the loader hoses pass through that bracket welded to the loader frame. I also noticed that there is quite a bit of pressure on the hoses at that point and saw that the protective hose sleeve was being pushed down because of the bracket. Since the hoses make...

I think it would depend on the toothbar. You could easily go that route (bolt on hitch) with a "bumper mount receiver". But that would also take time to add/remove if it wasn't something you wanted in your loader bucket.

sounds like you made a good choice. I've always liked the way Kubota runs the hydraulic lines inside the booms. They are well protected. I don't think you often find that on after market brands.

I think for break in it's just best to run them as you normally would. I rarely run wide open (haven't yet with this new machine) and not that often with the old bx23 either (only when necessary). Your machine does not have DPF on it, so I don't see a need to run wide open unless you need the...

That looks a bit complicated to use. I ordered one of these: https://www.amazon.com/Titan-Trailer-Receiver-Bobcat-tractor/dp/B00B0OOCBS/ref=sr_1_fkmr1_3?ie=UTF8&qid=1516219215&sr=8-3-fkmr1&keywords=clamp+on+reciever+hitch (I don't recall paying $72 though) for use with my old bx to move...

I was told that i had to move the engine forward as well on the BX23...But I'm happy to report that it wasn't necessary. It was very close in getting the fan off, but it worked without moving the engine. I believe I got the R&R instructions off TBN. Interestingly, I saw that I still had the...

well, i just came in from plowing...nothing to report. Couldn't get it to happen today...weird.

I should add that after replacing mine, I bought a full set of skid plates from Bro-Tech and never had another issue crashing thru the woods.

I had to replace mine onece on my BX23. I did it myself and it really wasn't that difficult to do...about an hour and a half is what I recall. If you do, replace the fan belt while you have the drive shaft off. There were some pretty good instructions that I had found when doing mine, but...

Mirrors. :D

really need to see a pic....any chance you have KTAC insurance on it?

I have an old one from an 8N. it's a 6 footer that I used on my old BX23. Worked great for snow. Only issue is that you couldn't spin the blade around while hooked to the 3pt hitch..blade was too wide for that. didn't matter, as I always plowed in reverse using the backside of the blade on a...

that's pretty slick

nope. No can do. 3pt has to be removed. I will say that the 3 pt comes off the B2650 easier than it did on my Bx23.

First, sorry, never could figure out the multi quote thing... RCW- will do, I want to see if the rpm drop can be seen on the tach Orangeglow- I have not tried from the other side as the loader stick makes it difficult to climb on from that side...I don't recall seeing a step there either...

Does anyone else with a B2650 ROPS version (or any other model I suppose) notice a decrease in idle rpm as they get on the tractor? Seems like every time I put my weight on the step/floor (when climbing onto the tractor) the idle speed drops a bit. :confused: I know it sounds strange, but it...

Re: Introduction and 525 loader question I think you can get either bucket (60" or 66"). Just need to specify which.

I'll say this. When I was looking for a new machine, I found that the dealers were actually giving me a very fair, if not high price for my trade. There is a great market for used sub compacts, but they are easier for dealers to sell (they can offer financing), where you, likely can't. I'd run...

yes. QA as in skid steer quick attach system.

awesome post.