B2650 3 point arms with BH77?

[Larry0071]

I had a BX25 and was able to leave the 3 point lower arms and sway bars on and just fold them straight up and then put the backhoe on. Can this be done on the B2650, or do I have to completely remove the 3 point lower arms to put the backhoe on again?

I liked how on the BX25, folding the arms up meant that in about 3 minutes I could slip the top link in, attach the 2 lift arms with pins and be ready to go and grab a rear implement.

Sent from my XT1650 using Tapatalk

 

[mpham]

Don't have a backhoe on mine so can't answer. Hopefully someone will come along with the info.

 

[dirtydeed]

nope. No can do. 3pt has to be removed.

I will say that the 3 pt comes off the B2650 easier than it did on my Bx23.