Search results

hey RCW I think the saw your were referring to was made by Mercury a couple of my logger friends each have one the engine was used on Wajax Mark 1 fire pumps also Hank

Ah come on guys the Red handle is for the High and Low range and it is in Low the H - L tag is bassackwards High range has the Red handle forward

did anybody get the joke? hint it is in Low range right now beside the removable seat cushion

One of our Kubota tractors is the same model as yours and when I bought it I saw that the oil pressure switch wire was cut. So I stripped the wire and wrapped it on the push on connector-when the engine started oil light went off and when I killed the engine and left the key on I could see that...

I have a 5 Ton. two post hoist in my shop- The one I have was made in Texas which I hope will be better built than a off shore model. I've had it for 9 years now and so thankful for it. I poured the concrete floor 20 years before I bought the hoist but over did the thickness (12") of the...

Due to my photographer past- Kodachrome is right up there along with grateful Dead's Ripple cheers Hank

1hp electric motor driving a 1" shaft with two self aligning bearings the shredder is made from apple wood with a "million" stainless screws it takes 8-10 5 gallon buckets of apples on each pressing a jack all automotive jack does the pressing we get 8-16 imperial gallons of juice each less...

When I first arrived in our little valley in early '70s I noticed a lot of apple trees loaded but nobody using the apples. So a welder friend and others helped build my machine, My apple picking partner and I split most of the juice and the rest make for interesting trading. I freeze most of...

It has been a poor year for apples in my end of the planet. So far we pressed over 200 imp. gallons our usual year is over 500 imperial Gallons- with 1600 gallons on our best ever year homemade machine We built from plans out of a 1903 Popular Mechanics magazine but instead of wood we used...

During my last physical examination, the doctor asked me about my physical activity level. I described a typical day this way: "Well, yesterday afternoon, I took a five hour walk about 7km through some pretty rough terrain. I waded along the edge of a lake. I pushed my way through bush. I...

" When in doubt, tell the truth" Mark Twain

on getting old when your farts are wet and your dreams aren't

any chance of a leaking intake manifold gasket

my 1/4" drive is also in inch pounds and newton metres the other two torque wrenches are in foot pounds and newton metres my farm truck is a 1958 VW Single cab- drop sides handy rig cheers Hank

My 3 made in Australia B&W Torque wrenches- Dual Signal pin pops out and you can see and hear it when the torque is reached 1/4"drive to 20 ft.lbs 1/2" drive to 200 ft.lbs 3/4" & 1" drive to 800ft.lbs Hank

nice work Torch Hank

exactly :)

shoot-shovel-shut up

Here on the mid coast of British Columbia it is raining and 8*C 42*F mildest winter I can remember for the last 45 years so far weather forecast said we are in for a cold spell with -18*C from a large Arctic front heading south I have plenty of dried fire wood and projects in the shop to keep me...