Search results

I worked on a 3 cyl. engine with no oil pressure a plug in the cam shaft blew out and was sitting in the cover good luck Hank

Thanks I'll keep checking on it hank

Thanks for the reply Bulldog I'm a bit confused on how much lube to put in the front axle using the 27mm bolts on each side of the axle. The transmission has UDT lube in it maybe that is the "White" I see cheers Hank

Hi Gang, Older Kubota 4x4 18hp 2 cylinder model 175 with tiller A front end loader has been tapped into the hydraulic lines all works good. I'd like to change the fluid levels and not sure what oil goes where and how much. front diff front angle drives 2 -27mm bolts on axle tube- how much...

you might have to turn the engine over by hand quite a few times to get all the dot to align with their mate Hank

On a customer L185 tractor his low oil pressure problem was a cam shaft end plug that got blown out in the cold weather. I tested the oil pressure with a 0-80 psi gauge it hardly moved the needle. I used a 0-30 psi gauge and got <6psi. Seems that model used a cam shaft that had a hole drilled in...

We live in Bella Coola British Columbia 1/2 way up the coast and a long way from the bright lights thanks for the links guys

No contact with Vic maybe I'm doing it wrong hank

Hi Vic, we are looking for tiller tines for a 20hp Kubota (36 tines) we are in BC Canada also looking for Honda 8hp(SRC) tiller tines (10) thanks Hank h.winning at xplornet.ca

Thanks Eric I sent Vic a private message cheers Hank

Hi Gang, Any body happen to know of a place to get tiller tines? I imagine that there are different sizes the tractor is a 3 cyl Kubota approx. 20 hp with Japanese tiller (not sure the number) I'll be measuring the tines I have for sizes any dealers or suppliers thanks Hank