Search results

Can or can’t overfill? Does the rear have drain and fill plugs or is it somehow connected to the hydraulic system? I don’t see anything in the manual and I don’t see where the drain or fill plugs are for the rear wheels?

Anyone give some advice? Also, if I wait until after I fix the leak on the front hub - I want to keep oil topped off, but there’s no way to see the level. Can you overfill it?

I am trying to change all the fluids on the L295DT I bought last year. In the manual it says: - Change front diff-gear case oil (left and right) 2.1qt Gear Oil SAE90 - Change front wheel shaft oil (right and left) 1.6qts Gear Oil SAE90 Are these The only two places that need gear oil changed...

I have a 40-year-old L295DT. I had to have the dealer replace the clutch right after I bought it and they used Kubota UDT. After doing some repairs I need to top off hydraulic oil. The dealers is across town is closed on Sundays and their oil is very expensive. Can I buy hydraulic oil from...

Thanks. I replaced the hydraulic pump because I paid the dealer for a diagnostic and that’s the work they quoted me needed done. Assuming I’ve never done anything like this before - can I get this at HF….or Amazon? Will this only work where there are flexible hose fittings? Start at first...

Well, I’ve had this tractor for about 9 months and still haven’t been able to mow my field with it! Right after I got it, the clutch went out and I had to break down and pay the dealer to do a tractor split and put a new clutch in. I bought a new brush hog while at dealer. After they repaired...

Well, the HF puller did work - thanks. Now I just need a few hours of daylight when I’m not at work so I can get it put back together!

Aaarrrghh…. Borrowed the smallest gear puller they had at AutoZone, tried the smallest one they sell at Advance Auto, Looked at ones at Harbor Freight, even looked at a faucet puller at Lowe’s - all too big. The arms won’t fit between the gear and the pump housing!?

So the spindle washer is supposed to be bent up one side of the retaining bolt? Also, when clutch was done, dealership refilled with Kubota UDT…is other hydraulic fluid compatible?

If keyway is an extrusion on one side of shaft that the gear fits over - yes. Why? Does that have something to do with getting the gear off? The washer is “keyed” into the shaft, but other sideis bent 90 degrees up side of retaining bolt!? Is it supposed to be that way? Should I try to...

I’m trying to replace the Hydraulic Pump on my L295dt. I got old one off, but looks like there is a drive gear on the shaft that I need to take off and put on new pump shaft. I removed bolt at end of shaft (and washer which was bent on one side) but gear is not coming off!! 1) how do I get gear...

How do you get the drive gear off of the old hydraulic pump to put on the shaft of the new one?

Anyone have input on the two following questions: 1) any difference in quality between any of the aftermarket pumps available on eBay or Amazon? 2) when I had the clutch done the Kabota dealership put in Kabota hydraulic fluid. Quite pricey for a 40 year old tractor. As I work on it and change...

After they did clutch & rplaced hydraulic oil, the loader & 3-pt worked when I checked everything at dealership...and bucket/brush-hog lifted fine for them to get on/off trailer. But after it ran 15-20 minutes, wouldn’t work? Next day, when they came back to pick it up - worked again cold? I...

Are all the aftermarket pumps on eBay and Amazon generally equal quality?

I assume the original pump.

I haven’t even really got the chance to use the tractor since I purchased it. I had it taken to the dealer to get a once over and since it sat in their parking lot for about a month the clutch seized up and I had to have it replaced. The front and loader which I believe to be original to the...

Thanks. I wonder why the dealer is quoting me four quarts of hydraulic fluid and a filter? Isn’t this the mesh filter that can be cleaned? Do I need to be worried about purging air from the lines once I put it back together?

First time tractor owner. I bought a 1980-ish Kubota L295dt. Shortly after buying I realized the clutch needed replaced and bit the bullet and paid the dealership to do the service. just got it back and now the bucket loader and three point hitch hydraulics are not working and the dealer said...