Search results

Thanks Guys it was a cheap fix after I found out what it was. The hair line crack could only be heard when the machine was running and sounded just like a bearing going out, Hope this helps others with this machine. This series of ZDs had hydraulic pump issues in early serials and got a bad name...

Thank Joe!!!!! :) my kids gave it to me years ago....;)

:):):) me too thats why I had to ask because I've played around with Aufhauser as "Cast Iron Rod" and it ended cracking out even with drilling and preheat. and grinding off stress risers. I have trouble seeing without cheaters anymore and use auto darking hood to save the old neck joints. I...

Here is the exact location of the rubber dampner added to prevent Resonance between the muffler brace the frame attachment point. :cool:

Here are some of the photos I hope to up load for specific details of the fix. At least 60 hours after this fix, no cracks, no noise, just mowing as it should be....:D

Re: l185 won't start and water in oil and more problems Patrick ..... "To list the procedures in the order I would recommend is magnaflux first. If that shows nothing then pressure check. Usually magnaflux is used to find what otherwise could not be found. Use this first and then back up to...

Dusty my curiosity is killing me are you welding that mild steel angle to a cast steel axle housing? What electrode are you using.... this is killing me I have to know Mr "T". :)

Joe sometimes you get whats called entained air locks in the axle housing. This air forces fluid flow out of the housing ( out of the fill plug lower threads ) before the air can escape during filling the new fluid. Vic is right drive it enough to get it warmed up let the air escape and then...

Randy you came to the right place to have fun with a bunch of good guys who love tractors. There is always someone willing to get answers on hard to find Parts, our Moderators are the best and I can say that with sincerity! ;)

Handy for short go to your private email page for an answer to your question Sir...

Mike have Pat call Tim back he has quite a story to tell you about your clutch. I was surprised what I found out about your M6800s problem....:D

al for short .....how old is this Tractor? L series and 4 x 4 = DT but 2350 has me stumped. :confused:

roy ... the I&T manual where did you get this from? I thought they called them WSM ( Work Shop Manuals) :eek:

Patrick.... aqua is king of rebuilds ;) and he does it right,I second his breakdown on why your rack is stuck. Once coolant get into your fuel system it oxidates metal to metal parts and this utra low sulfer fuel has absolutely not lubricity to help free stuck parts. Put the fish oil to her! (...

Get your manual and a good multimeter and measure the resistance in each plug against kubota spec., and you might want to get a manometer and actually check blow by against allowable crankcase pressure which indicates condition of rings, cylinder head valve guide wear, gaskets, worn parts can...

Wow... well good luck in getting the seal to do it's job. It may be heat related and the bearing is okay. Please come back with the history on this fix others will praise you for it :)

The little generator constantly puts out voltage via the engine drive so I don't know how the voltage regulator could hold off back feeding the battery. I know how your feel dude testing stuff all day long. H...., I'm a service manager and I don't understand why I want to fix stuff all night...

I think you have one of the last of this model manufactured in 1989-90. The reason I say this is because these seals never leaked without the input shaft bearing wobbling from wear. If I'm remembing a product bulletin I saw years ago at a Dealer it stated changing the input seal also required a...

Is this a 1989 B1750HSE/HSD Kjj for short....:)

:)Sounds like a high resistance to ground somewhere in circuit with the battery. How many times have you changed the battery and or the generator in 1200 hours? I would start studing the wiring diagram and looking for splices in the charging circuit for corrision, loose terminals, chafffed wire...