Search results

This is a typical symptom of a clutch not properly adjusted. You should have around 1" of pedal travel before you feel resistance as you continue to depress the pedal. More that that amount of free play will cause a dragging clutch, a clutch which has not completely disengaged the engine from...

This is the same type of power steering found on many cars in the year 2000 Dave

I do not think you have hydrostatic steering but instead a regular steering box with the power steering build into it... From the WSM: This integral power steering mechanism consists of the following two major components as shown above: hydraulic control valve and steering force assist...

I believe the only V belt is the one driving the dynamo. There is no rad fan as the cooling system is thermosyphon. Now is a good time to learn how to measure a belt by following this among many videos V belt Dave

You tractor is not one sold in North America I suggest you go to the Gray section of this forum and see if there is a USA equivalent Often there are businesses which specialize in rebuilding instruments for old vehicles. Seeing you are living in Australia, suggest you do some Google searches...

Is it possible that the tractor with the run solenoid (Runs without power to solenoid) is the one which is equipped with OPC (Operator Presence Control). Can machines be sold in North American after a certain year without OPC? I have been confused in the past using a WSM from Kubota Books and...

The big risk with the immediate start is that some fluid, fuel, coolant water........ gets into the cylinders. Because any fluid is non compressible you run the risk of bending connecting rod(s) and now your engine compression is not high enough to light the diesel fuel. Best to have the...

I am going to attach a page from the B series Whole Goods catalogue to show you the document you need to be looking for to answer your BX question. It is a document the Kubota sales people have not the Parts guys. Dave

I believe your machine has a controller which, when the key is turned to OFF, provides power to the engine stop solenoid for a few seconds to stop the engine. This is the opposite to which other posters are suggesting. There is also a fuse which I circled in red which needs to be checked. I...

You machine has a simple fuel system. How did you clean the tank as it sounds like junk is collecting in the outlet fitting. Dave

Contact forum member 007kubotaguy. He is often parting out older L's He is very knowledgeable about them Dave

I can help you with OPS manual. Using the private message feature send me your email address and in the message make it clear what you are looking for. Never post an email address in public forum areas... Click on my forum name/avatar and "START a Conversation" Dave

If the battery is measuring 11.7 at rest its days are over assuming the charging system is OK. Take the battery out and have it tested as it is the easiest step for now. Dave

Need more info on your tractor. Describe the type of shuttle shift you have. There are many models and not all have the same clutch/ shuttle arrangement M7060HF 2WD ROPS 8-speed M7060HFC 2WD Cab 8-speed M7060HD 4WD ROPS 8-speed M7060HDC 4WD Cab 8-speed M7060HD12 4WD ROPS 12-speed...

Re WSM B2320 My offer to you is this as it has been to all others looking for WSM's. Send me your email address I will sent to your email address a Jumpshare link to download the WSM. Once you have it downloaded, if you agree it is as stated, you will agree to upgrade your forum membership to...

I don't have a WSM for your model so what follows is an educated guess. Some small kubota's provide power to the engine stop solenoid to stop the engine which is opposite to what most tractors have. This is all part of the Operator Presence Control. If you think about it when the key is turned...

Did the bubbly bath involve a pressure washer? Dave

Does your filter I see on your tank eliminate water? I have a water filter on my bulk tank and both my tractor and excavator have never had water in their on board water separator. Before putting fuel into my machines, I run the fuel back into the tank to flush any crap out of the nozzle. Just...

Likely your battery ground connection to the tractor frame is not good. Remove it and polish the mating surfaces Dave

A Sweet Smell In most cases, it is due to a broken or damaged head gasket, which, in turn, leads to hot coolant leaking into your exhaust. On contacting your engine, coolant emits billowing clouds of white smoke that come out of the tailpipe. If left unattended, a coolant leak might cause your...