Search results

I used a piece of trex decking and it’s holding up well.

Good to hear ***128522;

I always used mine to push snow I really never messed with the top link after having it set the way I wanted it the only time I had to get off the tractor was to angle the blade. With heavy wet snow and the blade on a sharp angle it would push the tractor sideways because the BX24 was so light...

I used a five foot rear blade on my BX24 for years along with a set of chains it did pretty well as long as the snow wasn’t to deep and wet

Awesome setup

Mine isn’t setup like you’re thinking. I have the 1stand 2nd position dealer installed rear remotes on my tractor I could have just plugged the TNT into these remotes but that would not leave me with any to plug my stump grinder or any other attachment that needs hydraulics in back there so to...

Unloaded a trailer of wood bricks and double stacked them in the barn. They come on shrink wrapped skids weighing in at between 2050~2100 lbs.

Ken I'm sure they will be a good seller for you they work great. I only have two rear remotes on my tractor the dealer wanted almost 900 to add the third position and it cost me less than half that for the diverted setup. By the way thanks again for the gauge setup I got from you for my old...

Anyone else using a diverted valve to operate their TNT? I have the factory TNT setup on my tractor and to eliminate the need to use up two sets of rear remotes I installed a Summit Hydraulics Hydraulic Multiplier Kit so I could operate my TNT with only one of the factory remotes instead of...

No longer available

We love our German Shepherd we’ve had them for over 40 years

Price drop to $200 cash

Seems like a good deal

Toothbar no longer available I have a like new condition ATI brand toothbar made for a 66" bucket it is the model that has replaceable pin on teeth. $275 cash OBO for local sale only I'm not interested in shipping this one. Dillsburg, PA area Please delete this is no longer available.

We have Bobcat's at work and I have a New Holland at home both are good machines I never operated a Kubota Skid Steer but would guess they too are good machines. I looked at them when I bought my New Holland but they were out of my price range.

I know it's the same old story, Mo Money - Mo Money - Mo Money but if you want to jump up from a L3301 and really see any difference you probably will want to go to the L4701.

I have a 15kw pto generator in the barn and a 15kw diesel generator in the garage at the house we don't loose our power often but when we do we're ready.

Make sure your turn buckles are loose enough to let the arms swing wide. You might need a digging iron to get between the arm and box to help push them off the pins.

That's a lot of money I'd go back to that lady's place and help her look for them. :)

I don't know about the Grand L series but my L01 series had the following. One is a Spring Center Valve, Not detented or self-canceling and one is position Double Acting w/ Float Detent and one is Double Acting w/ Self-Canceling Detent. Usually in the order as far as positioning 1,2,3