Search results

  1. eserv

    B6000 new to me ... gonna try and get her started

    Cool little tractor! The only thing funky about the B6000 is that the PTO is a non-standard size and turns the "wrong" way. Very bulletproof machine!
  2. eserv

    L 3301 leak

    I just looked at the service manual for your tractor and it doesn't look like the information I gave you applies to the L3301! That's what happens when you rely on an OLD head for memory! The drive shaft is outside the bell_housing on the L3301! Sorry for the confusion!
  3. eserv

    L 3301 leak

    I'm glad to be of help! I hope that is the problem with your tractor! A lot easier than splitting it that's for sure!
  4. eserv

    L 3301 leak

    A metal tube that fits over the drive shaft and is the right length to correctly position the seal sleeve inside the seal and go against the coupler on the shaft. Plus a couple of O-rings to keep the tube from rattling on the drive shaft.
  5. eserv

    L 3301 leak

    if it is the sleeve coming forward out of the seal it can be repaired by installing the campaign parts without splitting the tractor.
  6. eserv

    L 3301 leak

    That's right! The oil usually appears darker than you would expect. It isn't that a rear seal leak is impossible! Just very uncommon.
  7. eserv

    L 3301 leak

    I am just going on memory here but I think there was a campaign on them! I know there was on a bunch of other L tractors two or three years ago. It involved installing a sleeve over the FWD drive shaft inside the bell-housing to retain the wear sleeve inside the seal into place. Check with your...
  8. eserv

    L 3301 leak

    Very rare to have a rear engine seal leak on a Kubota! Much more likely to be the seal on the four wheel drive drive shaft, either transmission end or the front axle end. Was the campaign done on that drive shaft on your tractor?
  9. eserv

    Bad metal fittings in Kubota hydraulic pistons

    Mostly all gone now! Just a bunch of alternators left. I'm experimenting with converting them into BLDC motors for electric bikes! We really didn't have a lot of warranty work over the years! If it wasn't for oil changes and setting up new tractors and of course repairing the trade-ins our...
  10. eserv

    Bad metal fittings in Kubota hydraulic pistons

    At the dealership I worked at very few Items were ever requested back by Kubota and I can vouch for going into the mechanics pickup box! I'm retired now and cleaning up my acreage and having to deal with getting rid a lot of Kubota parts I've collected!
  11. eserv

    BX2200 hydrostat transmission

    It isn't normal for oil to be coming out that port! As others have said, the colour of the oil indicates significant water. that said though I have seen them leak a little through there in a couple of cases. both times I just installed a plug into the threaded fitting and the problem was solved...
  12. eserv

    B2710 clutch or HST problem?

    Engage the rear PTO and note that it is turning. Then drive the tractor and get it into the condition of not moving/ slipping. Quickly look and see if the PTO is still turning. If it is the problem is in the HST, if the PTO stops when the tractor stops the problem is the clutch or possibly the...
  13. eserv

    Kubota F3060 Workshop Manual

    Take a USB stick in to your dealer the next time you buy filters and supplies and ask them about a manual. You might be pleasantly surprized, especially if you are a loyal customer.
  14. eserv

    Kubota F3060 Workshop Manual

    They aren't free, Your local Kubota dealership can help you out.
  15. eserv

    G6200 W/D640 Start Problem

    Just be sure the delivery valves are all tightened down snugly ( The big "bolt" on the top of the injection pump that the injector lines connect to! And please don't use either on a small Kubota engine! Especially one with glow plugs.
  16. eserv

    G6200 W/D640 Start Problem

    It's not that I want you to try it! It is that people often do that and loosen the delivery valves by mistake and the machine runs exactly as you describe! Shouldn't happen on it's own though! ( most of the time they won't admit what they have done so I've learned to approach the problem this...
  17. eserv

    G6200 W/D640 Start Problem

    Have you recently bled the injector lines at the injection pump?
  18. eserv

    RTV x1100c losing coolant

    Find out if it's coming from the coolant reservoir bottle or if there is a hole somewhere. Be sure to bleed the system when you fill with coolant. ( little valve on the hose above the engine radiator)
  19. eserv

    Code P-0191

    Well..... believe what you will, but the whole purpose of Tier group Emission standards is so your and my great-great-grandchildren will have a nice place to live. Your descendants will likely be farming with electric tractors anyway.
  20. eserv

    Kubota Skid Steer SVL 95 2S Error Code 9302

    Thanks for letting us know! So often folks come on here with problems and many of us leap to helping them but then they go silent so no one here knows what actually was the problem! There is an amazing amount of very helpful information on this site but the best ones are when the actual...