Search results

Look at Harbor Freight, They have tarp covered structures to make a great cover for your tractor. They were on sale this week for $150- 160. They are 10 x 17 feet. This is the bad part. They are not tall enough to drive into with out putting the ROPS down. So I put down some railroad ties to...

https://rufroadmotorsports.com/agm-vs-standard-battery-charging/ This article says there is no harm done to the lead acid battery by using the AGM charger. It simply charged the battery at a low 2 volt rate. NO harm done.

They called it a leveling box. Look up: Wanted RH (adjustable) lift rod for B7100hst

I drive a lot and sometimes you just get sleepy. I got a God send message."This is the IRS....." And they left a call back number. I called the number back and asked for the address so I could send them a check, and again so I could get their name so I could tell their boss what a good job they...

https://www.tractorsupply.com/tsc/product/countyline-blade-bolt-kit-pack-of-2?cm_vc=IOPDP1 Look at this it looks round to me. The description says there is a keyway but my bolt is spinning around. All I can find are drawings of the Kodiak parts 124 SMH. I need to find the correct extension to...

The phone scammers are able to make your number appear on the screen of the persons' they are calling. I get a lot of calls from my area code - same exchange and the last 4 numbers changed. I often call them back only to get the message that that number is not in use. There is nothing that you...

Why on earth do they use round headed bolts to secure the blades on a rotary cutter? I took a 4 inch grinder to the bolt head to make 2 flat spots so the pipe wrench could get a bite. I have pounded on the nuts with an impact and it will not come apart. Now I can not get the socket off. PB...

I use a 8000 lb winch to load cars, trucks, machines onto my gooseneck. I run it off of a marine deep cycle battery and can load 4-5 times without charging the battery. Perhaps you could fab a mount for the battery on the winch and use a plug in charger to keep it up as needed. Then there is...

Maybe I don't think right but I would hire a handy man service for an hour and sit and watch him change the tractor over for me. Even if he has never done it before with the supervision they should be able to do it. Even if it was $50 per hour that would be good money spent not to hurt nor buy...

Re: Man Made Global COOLING?! My dad had a little 2 wheel tractor with a 5 hp B&S. I made a small 2 trailer to hook to it. It was a blast just to ride it. No seat just step up on and ride. As a kid it was fast......2 or 3 mph!

Diesel engine oil will not stay the tan color like a gasoline engine. You should not worry about the color of the oil unless it turns milky. The oil will not go bad from what I understand but it may become contaminated with moisture due to the short run times that low hours would indicate...

Have you looked at after market loaders? Just wondering if there might be some cost savings.

Tractor Supply has black or white 4 ft step in posts that you could just pick up for $1.99. Nothing to freeze nor anything left in the ground over the summer.

I would think that the clearance under the tractor is going to be the problem. Placing the back wheels up on blocks and the using the fel to pick up the front might give you enough room to place a dolly under the mower. Allow the mower to come down on the dolly and disconnect it. Lowering the...

A quick google and a site came up and said approximately 7,000 lbs. There is an owners manual for sale on ebay.https://www.ebay.com/itm/KUBOTA-WHEEL-LOADER-MODELS-RW25-RW30-OPERATORS-MANUAL-/362249295980

"why do you guys buy 4wd tractors at all?" Well that is an interesting question. When you are backing down to mow around the lake and look over at the alligator you just do not want to get stuck in the mud. And building up the pad when you are building slab on grade homes requires 4wd because of...

Get someone to make some sandbags to put around the base. They will not walk off the base and do a much better job damping the vibrations.

Re: B7100hst What are you calling a leveling box? A box blade?

Re: Man Made Global COOLING?! Does that come in a right hand model?

I would rent, borrow or hire a tiller to break up the harden area and then drag it smooth with a piece of chain link or something similar to blend the surfaces together. It could be done with the box blade but even with the scarifiers it would be difficult to brake up the hard spot and then...