Search results

Hi I am trying to repair a sloppy bearing and leaky seals in the front of my F2100. I have the top and bottom pieces off but the bearings won't budge. I assume from the drawing on the Kubota site that there are sirclips under the bearing and gear that hold the spindle rod in place. the problem...

My F2100 is very slow bacing up. Lots of forward speed though. Wondering if the is an adjustment for this or is this kind of normal.

Thanks everyone...my thoughts for the T5 15w 40 was that I run it in my 580 Case and my 53 GMC truck. As UpNorthMI mentioned, I was thinking buying bulk. I could change the other two to the T6 5w 40 but the price up here is crazy. It's on right now in my area for $50.99 for 5 liters which is...

I have an F2100 and it calls for 30 oil. I was wondering if it would be okay to use Rotella T 15W40. I know a lot of manufactures have changed their oil viscosity recommendations since manufacturing and wondered if anyone knows if it changed for the F2100. I will be running it primarily in the...

Finally got out. It was kind of stuck, just had to get behind it like you said and out she came...thanks. Now I can put it back together and hope there are no leaks...fingers crossed :)

Well...got the seal out but can get the sleeve to budge...seems to be really on there. Any suggestions ?

Thanks... i was looking at that diagram on the Kubota site. Just didn't want to take that area apart just in case it was the wrong area and i opened a can of worms. My machine has a dual control on the hydraulics. The second one has quick connects that I assume ran some other implement, it works...

I have an F2100 and the control lever to lift the front hydraulics works but doesn't return to center when released. If I push it forward it stays there until I pull it back to center, the same thing when I pull it back. It seems a little stiff too. Anyone have any ideas ?

My fuel gauge on my F2100 is at 1/2 tank when the power is disconnected and does move a little when power is to it. My question is, do I need to purchase a Kubota fuel gauge or will just a generic one work ? The temperature gauge I just don't trust anymore so I would like to change it too. It...

Great...thanks for all the input. It might not be as bad as I originally thought. Might see if I can find one of those tools too, if they aren't crazy priced up here. Now if I can ever get the parts I will be ready to give it a shot.

Do you know if the sleeve is difficult to get out ? Any hints on putting the new seal and sleeve back in ? With this virus and shortened hours it's difficult to get parts but the dealer seems to be working with me, although slower than normal. This would be a good time to get this done seeing...

Had a look at the link, they look like parts list manual not WSM. They don,t have anything for the F2100.

Thanks, it looked that way but sometimes things aren't as they seem:) I seen the sleeve on the parts diagram from Kubota but didn't think about changing it too. I will now... I will ad it to my parts list if the dealer replies to me. Pretty much everything is closed down up here due to the virus...

I have a leaking seal in the brake drum compartment of my F2100. It looks to me as if the seal can be removed and replaced without removing the entire shaft. I have attached a few pictures of what I am looking at. Any tricks or hints for doing this would be great... Thanks Dave

I checked the links and with the exception of ebay, nobody will ship to Canada. The one on ebay will cost me about $160 with shipping, then I am not sure what I will be charged on top of that for duty and brokerage fees. Then maybe tax....not sure. I have ordered from ebay.com before and it...

Thanks, I will try one of those. Hopefully they are pdf download. I can't seem to find much available here in canada.

I need to do some repairs, brakes, directional pedals, etc. to my F2100. I was wondering if anyone had found a good service/repair manual they would recommend. I see a few on-line but I am afraid to get one to find out it's real bad and that I have wasted my money. Any help would be great...

Thanks Wolfman I have read a lot yesterday about some Kubota equipment having a wet brake system. I was hoping this was one of them but doesn't sound that way. I will have to find a diagram with part numbers to make sure the parts are available before I go tearing it apart. Hopefully they are...

Hi Everyone. I am new to the forum. Had a quick look around and it looks great. I have a problem that I am hoping someone can shed some light on for me... I was looking into fixing the brakes on my F2100. So, I took the cover off the brake shoe and drum area. Much to my surprise, about a cup...