Search results

  1. CGMKCM

    Dump Trailer for MX5400

    Speaking of safety, how will you keep the three point lift arms locked in a set position? I would also like to use my dump trailer as O.P. described but the lift arm issue has me concerned.
  2. CGMKCM

    L3560 Wheel Weights

    I think you have to order 1700lbs of weights to buy from Everything Attachment.
  3. CGMKCM

    Switching from Pioneer to Flat Face

    I had a similar coupler issue. I purchased these and they work great. Adapter
  4. CGMKCM

    Yard needs smoothing tool

    For those who are willing to spend a little $$$ a 3 point mounted pulverizer is an excellent tool for leveling and prepping soil for planting. It also does a great job on gravel driveways. I picked up a used one for $400 at an estate sale.
  5. CGMKCM

    1.33 acres, heavily wooded and overgrown... Need advice on a tractor purchase!

    I would hire someone that does forestry mulching to get rid of all the vines small trees and do a rough clean up around the big trees. After that decide what your tractor needs will be. mulching
  6. CGMKCM

    L4600

    Can you pull the starter and use flywheel to do the line up? Strap wrench?
  7. CGMKCM

    ZD326 Mower stalling when push handles fully forward

    Visual inspection could confirm that. Does service invoice have a charge for fuel filters? How many? It may be worth going back to dealer to make it right or fix it yourself and move on. I have fired my local Kubota dealer do to no quality control. Found another 25 miles away that does great...
  8. CGMKCM

    Anyone seen or made a Grand L 60 fuel fill mesh strainer/filter?

    Go to Walmart and buy this Mr.Funnel
  9. CGMKCM

    ZD326 Mower stalling when push handles fully forward

    Get on the ground with a flashlight and identify the location of all of the fuel filters. It is easy to remove a couple of bolts and drop the frame that has fuel filters and pump mounted to it. I would bet that two filters will look black and crudy, the other two will look much better. Replace...
  10. CGMKCM

    ZD326 Mower stalling when push handles fully forward

    So handy or not handy I have a couple of questions for you. If you switch fuel supply to the other tank do you still have a problem? I had a problem like yours that only happened when I operated on the right side tank. Problem was solved when I drained that tank and found a small piece of...
  11. CGMKCM

    Ballast Box needed?

    My 4 in 1 weighs close to 700lbs. Kubota light duty bucket weighs around half that. My grapple weighs about 500lbs. On my 4760 I have filled rear tires and according to the chart at Messicks it adds 357.5lbs of ballast per tire that is water/methanol mix. If you add Rim Guard to the tires the...
  12. CGMKCM

    Has anyone filled their tires with fluid and regretted it?

    I have filled tires water/methenol. I only regret not having the tires filled with Rim Guard. The added 460 lbs Rim Guard would provide would be nice to have.
  13. CGMKCM

    Battery jump packs

    I have one of these works great on even larger diesels. A couple times a year Amazon has them at $50 off. Jump pack
  14. CGMKCM

    RTV-x1100c black smoke and loss of power.

    Turn the A/C off and stay in low is about all you can do to make it run better. Naturally aspirated diesels lose 2.5% of output per 1,000 ft. of elevation.Tech source
  15. CGMKCM

    Piranha Tooth Bar Safety Guard

    IMO a solution in search of a problem. Pointy sharpy things should be on the ground to avoid injuries.
  16. CGMKCM

    Hyd. Top link?

    If you call Pat's quick hitch they will tell you the length required for the top link.
  17. CGMKCM

    2016 Kubota RTV X1100C

    2019 I purchased a 2016 RTVc 1100X for 14k (400hrs, just the RTV). Talked down the owner 1K because everything was dirty and caked in mud. My Sister In-law just purchased a new one for 21K. Was on a wait list for three months.