Search results

Anybody else notice the blue tractor was electric? Not that it had anything to do with loading problem.

I have this same box loaded with 5/6 gravel. Tires filled and wheel weights also. The box makes a huge difference when using grapple to move logs for firewood.

With key on do you hear the fuel pump running? Grab a flashlight and look at the pre-pump fuel filter and post pump fuel filters, they are also near the battery. Also if no fuel try shifting to the other fuel tank.

This is what I use Mystik JT-6

Another option If you can't find a used canopy. Rhino

Your getting warmer, I checked in 2020 and they wanted $3500.

I have this on my lite duty bucket and it does well for light digging, grading and spreading.

My 4 in 1 weighs 700lbs, is 70"width and has teeth. It is rated as medium duty and is for a large tractor or medium size skid steer. I have loaded and weighted rear tires (about 1300lbs total) I then add a 1k ballast box. My tractor does fine pushing and filling bucket. Dry material it lifts...

🍿

Shame you don't live closer. I would sell you mine.

FWIW In my area of N.C. methanol is added only for freeze protection. On my 4760 10 gallons of 100% methanol was added to each rear tire and topped off with water. I was told I was freeze protected to 15*. I looked into Rim Guard and I have a dealer 60 miles away from me. No tire service places...

Another 90* blow gun option. AMZ

I should have been more specific. The HF ramps are absolute crap. The Rhino ramps are not much better. One star reviews I mentioned but did not provide Link.

Read the one star reviews before buying. I had the old version of these ramps and they were grey in color and worked great for many years. I replaced those ramps with these ramps and my F-550 crushed the ramp first time I used it. I would guess my F-550 front end weight at 4500lbs. I use the...

I have been reading the La 1055 owners manual Loader. It has contradicting information about loader lift capacity. It will lift more than a ton as long as you don't lift it to full height. But there is a safety sticker that states this. Clear as mud.

I believe you have a 160* thermostat. Easiest way to check is purchase or borrow a laser thermometer Laser T and measure temperature leaving the engine headed to radiator. Just above item (5). My RTV-1100 runs around 3 bars on the digital gauge. Smell is most likely a small leak where hoses run...

It sounds like your rims are set in the narrow configuration. You can have the rims set to the wide configuration and the valve stems will be on the outside. You will also gain more stability with the mounting wide. Check owners manual, it should have an illustration of what I am talking about...

okay, that makes sense, Try looking at this place O.A. I believe a Kubota dealer will have to order, they do not sell direct.

Around here the RTV 1100x-C sell for $22k. Can you trade it in and get the cab model? Heat, A/C and wipers are standard equipment.

The operator is the limiting factor on my open station machine. I have winter clothes that keep me warm down to 25* F with no wind.