Search results

  1. aaluck

    Advice on what to buy

    First the tractor, 150 hours is nothing. Just doing a VERY quick search these, they seem to be priced at about 13k for the few they have on tractor house. So your basically buying the tractor and implements for a fair price as shown by @RCW . If you will use the implements then you have a good...
  2. aaluck

    Be careful out there !!

    Very active this time of year and spring. I keep my snake boots in the truck.
  3. aaluck

    Painting the bottom of the loader bucket?

    Probably cheaper then wood right now!!! 2x4 is running $8.00!!!
  4. aaluck

    B7100 trans removal - a cautionary tale

    Thanks for sharing the tip. One I never hope to need to use.
  5. aaluck

    3 Point quick hitch issues

    I have done away with the hook completely for the very reasons you state. Also on my bush hog and bush hog finish mower my top attachment never stayed in the hook as it needs to pivot up and down and when the back of the mower was pushed up the top attachment would pop out of the hook. For...
  6. aaluck

    FEL Downpressure great, lift weak?

    Not really. Just a couple (one).
  7. aaluck

    Need some help with BX2200 MMM creating "circles"

    It also appears that the ground is very unlevel. Maybe just the photo but that will cause this issue as well. Is this occurring throughout the yard or in particular spots? Could be the blade moving up/down or the ground moving up/down. If it is everywhere probably the blade. If no probably...
  8. aaluck

    Sharing some pictures of my restored B7100

    I cannot believe what some folks can do! Very nice job.
  9. aaluck

    Analysis Paralysis L2501/LX2610SU…….B2601

    I have a similar setup as you. About an acre around the house and 6 that are pasture. I use the finish mower around the house. I have the bush hog at the lowest setting possible for the other 6 acres and it cuts LOW. The finish mower will probably handle it all but adjusting the wheels every...
  10. aaluck

    drive shaft b2650

    If your talking about the 4WD the front axle has gear oil in there.
  11. aaluck

    1 Cool ROPS accessory

    Love it. Just getting harder and harder to find stuff (anything) not made there.
  12. aaluck

    1 Cool ROPS accessory

    Good luck with that o_O
  13. aaluck

    Buying advice

    Be careful. Had a buddy do that a month ago and when he showed up another salesman had "accidentally" sold it.
  14. aaluck

    I needed a little more room ( 9" )

    Good idea. Plus you always know where it is.
  15. aaluck

    1 Cool ROPS accessory

    Miss them bad!!!!
  16. aaluck

    ATV Spreader recommendation please

    I cannot speak to throwing salt (here in Alabama) but I have tried all of them for throwing corn--I throw about 600-700lbs a year for wildlife. By all I mean pull behind (4-5 of those), hitch mount and make one from a 5 gallon bucket and a feeder motor. What I can tell you is the pull behind...
  17. aaluck

    Opinions on post hole diggers

    I really have not worried about that...maybe I should. After about 1 minute of digging back to clean. You could spray it down though, good idea.
  18. aaluck

    Another B2401

    Forget about the tractor. With the price of wood these days there is a gold mine in the background!! Almost passed out at HD this weekend. 2x4x8 raw, not pressure treated, is $7.08!!!
  19. aaluck

    Opinions on post hole diggers

    I dug a 2 foot hole with it and then dropped it into the hole for storing. If you have it in a hole, or some people attach to a tree, taking it on and off is quite easy. Remove the top link. Back up and lift the top to the top link and put the pin in. From there I just raise or lower the lift...
  20. aaluck

    What did you do to or on your Kubota today?

    Dug a trench with my modified (to 6 inches) single plow and ran 120v ground wire for tree lights.