Search results

Your ahead of the game on that one!

Tip for that style, put some never seize inside the pin, they are notorious for getting very stiff when water sits in them for a while. The sleeve type I got is less likely to do that. My KK 6' finish mower has the pin style and man, the first time I go to put it on in the spring I have to...

It looks like the coasts and south are getting the inventory first. I see many more listed of what I ordered than last week and they are either west coast, east coast or down south Louisiana and Georgia. Nothing yet in the midwest. Now Loaders, still not seeing them other than the hoarder in...

Thats exactly what I did for starters. A few years back had a similar issue with the 3 point. There is a link to a lever that I guess tells the hitch where the arms are, and it seized up in the block and bent the rod. They are both moving freely though, I see no movement of the lever when they...

That above was due to implement not having a normal compact type PTO, and meant more for Utility tractors, which Tim did say was the case. It was sort of like the PTO pump on my backhoe, only much bigger with a weird looking connection, that rubbed against the seal. I also had issue with a...

Have some good news on my end, the L4060 is in, but no loaders yet. Now if I want to pay cash and take a drive there are a few down in Texas, but I think I will wait.

Congrats! I had a bit of good news. I had to go to the dealer to get a new hydraulic hose made and just as I was leaving, the sales guy stopped me and said they got the L4060 in, and the only reason he didn't call was because no loaders yet, no clue when they will arrive either, but at least...

Recently I noticed the movement has been a bit hesitant, and whiny when starting out cold, especially after using brakes. I had the pressure line blow on the backhoe, so after replacing it and purging I left the stabs down and raised the rear end up. Good thing too, the left wheel was loose, and...

It's under the left hose, if you look at the bottom of the picture you can see the 7th hose. The light in the barn isn't the greatest. I looked through my manuals and found I have the loader one still and it does have information on it. That left hose off the top is the PB one. If I am...

Which one is it then? Needs a bath, hasn't had one this year.

Found it! $129 in stock.

That helped a lot. I finally located where the cover is. Not easy to see with the wheel on. Now to see if I can find if that part is even available. That one appears not to need a bypass, is that correct?

Or they are sitting in containers outside of some port waiting to be unloaded. Not just JD and Kubota, try finding a Case 45C which is a near direct comparison to the L4060. None can be found. I just bought a pellet stove last week, by the time my order hit the warehouse, they were sold out...

I snipped out the picture from the service manual on where and what the rears look like Where the 5 is pointing is where the valve kit mentioned above would be installed. The plumbing in the picture is what I have been trying to locate, but without part numbers, is a bit hard to track down...

If I only knew what the power beyond line actually is. Have not found details on the loader yet. I also found that the spooler needed would be an open circuit one that allows fluid to flow when in the neutral position. It appears that is how they all are, and some come with a closed loop kit to...

OK I forgot that I had a service manual for my tractor and did some digging. The rear remote appears to mount under the seat. It is not something on my tractor that I can see, and I can't seem to find the parts required for it. The kit above appears to be what gets plumbed into it. So...

Page 38-39 of the manual has a mid outlet and rear outlet, but not much information other than to use a control valve with power beyond type and third line to tank. I know where the ports are but can't seem to find anything on it that shows it's use.

What most don't realize is that most dealers hide the shipping fees in the retail price they give a customer. Thats just how business works. It's not much different than when you buy a car, or even a tractor as the delivery fees are built into the price. With fuel costs skyrocketing though...

I can't imagine that Kubota shut down all their engine plants in Japan, so where are the engines? Are the lack of engines the reason for the delay? I know tubing is an issue, huge backlogs of tubing, first come first serve so those companies that had orders in first are getting supplied, those...

Lucky you. There is an L3560 HSTC that I can get, but, no loader! I ordered an L4060HSTC with LA805, and if an LA805 happens to show up, the dealer has me down for it and the L3560 in case an L4060 doesn't show up. This is worse than odering a truck, at least with a truck I can get some...