Search results

It makes you feel good about your dealer when you had zero set up issues!

You did just do a wiring project? Maybe check your connections and grounds?

oops Double post

Best make sure your attachment is picked up correctly! If something isn't lined up right, you just going to bend something. Honestly you guys take all the fun out of owning a tractor, such as hooking up implements! Its part of the whole tractor experience! Is it a need or a want? Maybe next will...

Unless you drive around all day with full bucket over bumpy terrane then just save your money! Especially if you just use your tractor for an expensive wheelbarrow!

Santa Im going to PM you my list of tractor implements!

It looks like you could use more gravel on the driveway also! I had a small truck load delivered. Stone is cheap, the delivery was not. I did get a break though because I was less than 5 miles from the place I bought it.

I had a similar situation. I dug a trench between driveway and high side where the water was coming from. Two foot deep trench, lined the bottom with 2b gravel. I installed 4" perforated black pipe and used a sock that went over the 100 feet of pipe to keep dirt out. Covered the rest with...

My neighbor gave me 5 square bales of hay. I ran the BX over to get them with no weight on the back of the tractor. Stacked the bales on the FEL. No problem until I started down the incline to my back yard! The rear wheels started to come off the ground giving me a fast ride down hill with no...

Overtightening the relief valve will increase pressure! I went through the same thing with my BX and the shim kit. I posted the problem here looking for how tight (psi) the relief valve should be tightened but got no response! Since the bx should be around 1850 IIRC most only boost to 2000! Its...

I like it even though its worthless now!

Believe me your dealer wants nothing more than to sell you a tractor! Patients! Its a different world we live in!

I need both knees replaced. In his defense I find it hard just getting around never mind exercising. A few hours just doing house chores in the am and my knees are killing me. Stiffness sets in and range of motion is limited! Im getting mine done next year because im only 61 and I have lots of...

I had both done. They are now over 20 years old and still good to go! You will be walking and going home the same day! Also had the right shoulder replaced and next year both knees. NO I do not feel like the bionic man! LOL! Should have gotten a good education and worked with my brain instead of...

Sounds like a lot of air is being introduced to the system!

I guess they were ok before you removed the loader? Did you try unhooking them and reattaching? When you hooked up were you too far away but forced the coupler on anyway? In my opinion these couplers dont start leaking on their own without some operator error! Many have complained about the BX...

You never put the loader stand down.

Dont press the brake pad! Press the shaft below the pad. I only use it for an e brake. The machine stops itself when you take your foot off the pedal!

Dan summed it up pretty well! Yep! Pretty looking, pretty expensive and if you use it enough it will look pretty ugly all bent up! Next will be a guard to protect the guard.

Interesting that you can hunt over a feeder! Its a big No No in Pa.