Search results

Mainer, I have a homebrew steel cab I install for cold weather activities. Weights about 365# with its CG about 41" above the floorpan. I have 2" wheel spacers but no wheel weights or fluid. My yards reasonably flat but rough. In the fall mowing leaves, with the cab on, i notice more...

Paul, Congrats on your new purchase! Regarding the Curtis Cab, why buy? Build your own like I did.

OP, one more thing to consider since you're on asphalt is adding a rubber or poly cutting edge to whatever you use. The corners of the blade's metal cutting edge have a way of catching asphalt. Mine are made from a horse stall mat about 5/8" thick. At the rate i'm going, 1 4x6' will nearly...

I have a BX2370 and don't have any slopes to contend with so YMMV. Other than the really heavy wet sticky stuff, I haven't had a problem with using a rear blade. And, I can also use the bucket if it gets too deep and wants to push me around. Also, a back up camera and mirrors will help save...

Bearbait, Great job! Bearbait 1, Stump 0. Being stubborn ain't such a bad thing! Regards

I went the diverter route and have less than $300 in my front hydraulics mainly for my BX2767 front blade. I knew i had some trees to take down and that cleanup is never fun. I went with an EA wicked pin on style but, I also have the Kubota quick coupler set up. Grapple weighs about 150#...

ZoomZoom, On my 2370, fuse block is located below loader valve under the radiator cover located below the steering wheel. HTH and post back with what you find. Regards,

+1 for Anderson Power Pole! Come in a variety of sizes, styles and colors. They even offer rubber protective boots to keep the weather out when not in use. All our electric lift trucks at work use them and they hold up well. I installed one to power the lights, wiper, etc in my cab. HTH

TomRC, I modified my TSC carry all to be compatible with my RK quick hitch. Moved the lower pins closer to the tractor along with the top mount. I also, lowered the bottom pins so i could get a little more lift when on the back of the tractor. Also, added some details down near the bottom...

Glad to help, I'll post some pics of how I've got mine set up. Probably won't be until Tuesday next week though.

I adapted my Country Line carry all to be quick hitch compatible and use a 15 or 25gal (can't remember) sprayer mounted on a wooden pedestal. I just back up under the sprayer with the carry all and connnect power. If you want a picture, i can send but, won't be home for another week. Regards.

Nor sure on the new model but prior model BX25 you needed to remove the 3pt hitch arms in order to install the backhoe. HTH.

No idea what Landpride uses on their grapples but the quick couplers for the loader on my BX2370-1 are ISO 7241B if that helps.

Took 'Jaws' out for a test drive. Cleaned up a downed limb from a recent storm. This EA Wicked grapple is a beast and there is a learning curve involved. At first, I would grab maybe 1 branch. By the end of the evening, I was able to grab multiple pieces on a consistent basis. For the...

Unloaded my birthday present from the wife. She said she hopes I'm worth it:unsure: I think I done well on both counts. Regards,

Bet you could salvage the wheel weights.;)

Wow, great job and by the looks of it, the frame's definitely not under designed!

Why? Because 17 of those 20 managers probably wouldn't be needed! Its called Unnecessary Fixed Cost Reduction! If they're like most companies, there's multiple 'overhead' employees for every 1 operator on the line.

Found it! Here you go.... https://www.orangetractortalks.com/forums/threads/buying-a-new-loader-for-my-bx-2370-vs-2380.37785/

I believe there has been one recently. Just don't recall which forum here. If i can find it, I'll post a link.