Search results

Seems pretty inflated to me. I just purchased a new 72” King Kutter Box Blade for about $1000 when upgrading from a 60” Land Pride BB1260

I Thought about that too but I’d rather have that much more dough to have gotten all my other gear. Also when I run that 3301 engine balls out, maybe I might just have ‘engine stress’ room to spare, since the 3301 has the same exact engine as the 3901. It sure doesn’t seem like I go thru as...

I went with the L3301 over the L2501 because I’m running up down the hills here a bunch with my brush hog and wanted a little extra at the PTO. Not one bit of trouble with the DPF in 3-1/2 years and 800hrs now—I run it hard. Had I been on flatter ground, an L2501 would have been perfectly...

I started this process back in March and have just about everything you have listed (and also a third function valve for my grapple). You would want to get with Brian at FitRite would be my primary advice. https://www.fitritehydraulics.com You’re going to be adding a lot more than you think...

I like having my loader on as well. In fact, I dislike having those quick attach pads not attached to anything since an unintended bump here and there can tweak one of the pads out of synch by twisting that bar (unless I want pull the whole works off, and I’m definitely not doing that). If I...

If it’s the bolt you’re referring to (see Messicks exploded parts diagram):

I just trimmed it as needed with diagonal cutters.

I bought a similar kit for my L3301 and ran the wiring over to the tractor’s fuse panel over near where my left foot is. I actually want to be able to actuate the valves with the tractor off so I could take the pressure off for ease in reconnecting the hydraulic quick disconnects later. Bird...

Contact Brian at Fit Rite: https://www.fitritehydraulics.com/

I was following the other recent thread on pellet guns as I was getting one on order (went with a Gamo Swarm Fusion in a .22) and thought I was gonna need to get my old SL-100 Laser out and as it turned out, I never did—it was already on paper when I mounted the included cheapo scope and it...

I hear ya—I got rid of this 7x16 dump because it was just too big for what I needed.

Nope, they just flap around once I drop the sides down—there isn’t any way to latch ‘em in the down position.

Actually both long sides do go down. Works out great for what I use it for. Had two pallets of pellet lime loaded in earlier this year that way. It’s a 10k trailer.

I picked up a nice little dump trailer with drop-down sides—super easy to load and unload and still light enough to move around with my Kubota, but refuse to go downhill with much of a load.

Brothers Colt and Henry

Picked the last of the (good) apples for this year.

I know this is an old thread but thought I’d try to put a picture to how I fixed mine, when this happens to someone else in the future. I had tweaked mine early on and was working around it ok until today, when I got provoked. The pad with the chain and binder on it had gotten a little ahead of...

My set came in today for my L3301–excellent quality and they got here lightning-quick. Thanks Ken

I’m not sure what’s going on there that doesn’t seem to be a problem at three other vendors I’ve purchased from since May, including a King Kutter Box Blade that made it here in under two weeks and a Cultipacker I ordered Sunday that’s being delivered tomorrow. I was told last week by EA it...

There’s a decent YouTube video (actually a few) you can likely find of a fella with what turned out was a relief valve issue in his BH77 that he finally solved. I’d be interested to see if it presents the same way. He persevered after months of torture. Good luck