Search results

The Safety Police are going to hound you, they can live in their bubble. Yes, I had a similar problem, my FEL bucket tilt would drift down what I felt was unacceptable, 300hrs on tractor, the 7 seals per side where $250 per side, I went to a hydraulic shop and got them for $100 per side, and...

Yes, unbolt it and use a tube. Nice cleaning job.

I have seen an O-ring that sits on the exterior of the Ram cylinder many times on new Kubotas, I do not see any use for it, just an extra.

Love my 7 footer, go heavy.

Not a gas or diesel additive but an oil additive "Proma" MBL8, I don't know how it does it but that friction test they do is very impressive, a salesman came by my fire station before I retired and let us do the testing with everything we could think of like, Mobil 1, Slick 50, and all the rest...

I put in a grid tied system myself 10 months, 8.25 kw, will be paid off in 5 years, $14,000, all so with the Q7 inverters it auto shuts off with no gride power for lin-men safety, I could put in a secondary system for $3-5000 to fool it with a/c coupling, but I am not going to worry about it...

Disconnect and cap the lines and see if it still drifts down to isolate it to the cylinder, I just did that with my FEL bucket cylinder at 300hrs, just rebuilt it. much better.

I shopped for over a year before I found mine.

My L47 works with a small disc that the 3pt can lift no problem, and I disc 10 acres in about 8hrs.

Thanks I will do that.

Please keep us up-dated, my L47 (330hrs) does the same thing, I capped off the hoses to test the rams and it still dropped, figure it is the ram seals, just found out that the kit, 7 seals/O-rings is $250 per ram. $500 plus tax to DIY rebuild my 2 bucket rams, Ridiculous.

I contacted Massicks to get a rebuild seal kits for the rams on my TL1300 loader, 7 O-rings in each kit, each kit costing $250, $500 for both rams. That is ridicules. Anybody figured out how to get seals from another source. I'm thinking, I will take apart the ram and Mic/Measure the seals and...

Up-date, FINALLY got the hydraulic plugs and caps needed to isolate my curl rams. They slowly dropped telling me it was both rams needing rebuilds. Better then the spools/valves. I rebuilt a couple on my old JD backhoe, anybody have recommended rebuild video for the rams on my Kubota. Yes...

When the water warms up its hard to stop, I put in a nighttime bubbler, sand filter, UV light and Citron, but I know it's only time before it warms up. Yes, it is a small pond, 40ft.

Please keep us updated on fix, & yes the operation police annoy me also.

It really depends on the attachment points for that cradle chain theory to work, I just had a trailer detach at the best possible place, the crossed chains were not attached to the trailer and RV for that to work, also in the 200-300 ft for me to pull over and stop, one chain was worn thru and...

Love my large 40mm toolbox.

What is the definition of woman? Ok I am going to be cancelled. You all please thicken your skin.

Where are you located at? That is the $64,000 question.

If you are going to run it long and hard, I rent the tool, had to trench 1/2 mile for a share of my neighbors well, rented a sit-down trencher, used it for 13hrs straight, best $900 I have spent, if I would have done that with my old commercial JD backhoe I would have spent more then that in...