What did you do to or on your Kubota today?

flyidaho

Well-known member

Equipment
L 3301 HST
Feb 28, 2017
428
253
63
IDAHO
Water service job today with a gas line in close proximity.

Start:
View attachment 104621

Dig:

View attachment 104623

View attachment 104624
View attachment 104625

backfill: The U-27 is still impressing me. Yanked and lifted that entire section of sidewalk with ease. I bounced it off the road to break it. I just couldn't heave the whole slab into the back of the dump in one shot.

View attachment 104626

Outta there

View attachment 104627

On to an emergency sewer line in the am. Seems like the guys got some equipment stuck in the line while doing a trenchless spot repair. It will no longer be "trenchless" after I get there. 😁
I sure was impressed with my U-25.
 

flyidaho

Well-known member

Equipment
L 3301 HST
Feb 28, 2017
428
253
63
IDAHO
Unloaded some drill stem pipe, 31' long, with the forks, easypeasy. Paid $85.00 each, compare that to buying new pipe!
IMG_20230609_092924731_HDR.jpg
 
  • Like
Reactions: 4 users

Toyman

Active member

Equipment
B7100HST, 1630, 4' Tiller, 4' Brush Hog; Mahindra 5005/Loader, Woods Cadet 84,
Apr 15, 2019
120
104
43
Pittsburgh
Spent the last 2 days working out the M4050 putting in my final spring plantings - pumpkin patch and deer food plots . The first 2 areas are the least rocky on my property so I broke up the soil with a subsoiler, then pulled the cultivator and finally tilled. Spread fertilizer and planted (sunflowers, rye & buckwheat) the 'flat' field, fertilized, hilled and then sprayed pre-emergent on the pumpkin patch. Planting today or tomorrow.

First pic is the pumpkin patch with the hills and reclaimed field below. 2nd is a field I reclaimed that was full of walnut saplings. Took out the trees and heavy vegetation in late winter, burned with glyphosate a month ago and got the soil turned, tilled and planted (rye and buckwheat). The last 2 pics are the M4050 with the cultivator I found & refurbed and added 2 bedding discs which worked pretty well.
M4050 1.jpg

M4050 2.jpg

M4050 4.jpg
M4050 5.jpg


My early sunflower planting and food plots that I planted buckwheat in late April haven't done so well with 0" of rain in the past 3 or so weeks, but hopefully they will recover with the rain called for this week.
 

Attachments

  • Like
Reactions: 10 users

Foxrunfarms

Well-known member

Equipment
Kubota LX2610, 1951 Farmall M, 1967 John Deere 110 Rf, 2010 Arctic Cat 700
Apr 25, 2023
366
522
93
WI
Worked up part of the hayfield that needs reseeding(if we get any rain) My back was hunting and wanted to see how the Kubota handled the digger so didn't use my b.
20230610_104740.jpg
 
  • Like
Reactions: 8 users

radas

Well-known member

Equipment
2022 LX2610HST, 3rd Function, Rear Remotes, BH77
Mar 21, 2022
719
833
93
Michigan
I tried, but she was not interested at all. 🤷‍♂️

I mowed with that as a kid and it has pulled trailers here for many years. I do plan to get it running but haven’t put any time into figuring out what’s wrong with it. It sounds like it has good compression so it will most likely run again at some point.
If I had the space and the time, that would have been a great project! Sadly I'd need something turnkey that needs minor stuff because I barely have time to maintain what I currently own lol.
 
  • Like
Reactions: 1 users

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,019
3,672
113
Wind Gap, PA
Quick sewer line issue. After several attempts to get this line patched with the trenchless tools (trenchless spot repair) the bladder got stuck in the line. So, I got the call to get it out of there.

diggy

H4-PET767-1.JPG


found it:

H4-PET767-6.JPG


pipe

H4-PET767-3.JPG


backfill

H4-PET767-2.JPG


H4-PET767-4.JPG


done in under 3 hours...and I didn't do any digging. Ground was bone dry and hard as a rock. Had the youngsters do it all but backfill! ;)

H4-PET767-5.JPG
 
Last edited:
  • Like
Reactions: 8 users

S-G-R

Well-known member
Lifetime Member

Equipment
LX3310
Jun 17, 2020
1,111
2,251
113
PEI Canada
Unloaded 50 cedar posts with the grapple and used the forks to move the aerator and landplane.
 
  • Like
Reactions: 2 users

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,515
2,543
113
Peoria, AZ
Unloaded some drill stem pipe, 31' long, with the forks, easypeasy. Paid $85.00 each, compare that to buying new pipe! View attachment 104629
Where did you find drill stem for $85 a stick?
My fence contractor has been negotiating from $150/stick down to $105/stick for about a year.
I need 1712 linear feet just for top rail. :eek:
 
  • Like
Reactions: 1 user

trial and error

Well-known member

Equipment
B7100dt manual trans. homemade FEL, 4 way hydraulic dozer blade
Feb 16, 2023
396
388
63
NY
Moved more wood today with the H.F. trailer and the little b. got the wood from some racks in the side yard into the "drying/seasoning pile" in the front yard. That sees the most sun and cross wind.Probably 6-8 heaping loads in the trailer and only found one snake 🐍 🙄. I am not a fan (of snakes), mostly the suprise factor, even if they are good rodent control, except we found another family of mice in the wood pile this morning alive and well. if I'm gonna have snakes I better not have mice and if I'm gonna have mice I wouldn't mind having no snakes, but alas I have both
 

Attachments

Last edited:
  • Like
Reactions: 4 users

Fordtech86

Well-known member
Lifetime Member

Equipment
L3200
Aug 7, 2018
4,976
5,917
113
Pineville,LA
Well broke the Bota today 😔, gonna have to trade it in 🤣

ripped the top of the toolbox off mowing brush 😂
 
  • Like
  • Haha
  • Wow
Reactions: 2 users

Old_Paint

Well-known member
Lifetime Member

Equipment
LX2610SU, LA535 FEL w/54" bucket, LandPride BB1248, Woodland Mills WC-68
Dec 5, 2020
1,732
1,728
113
AL
Led Zep.. ZZ Top.. Iron Butterfly,, Deep Purple :)
Throw in some CCR, Steppenwolf, Doors, Aerosmith while you’re at it.

Meanwhile, back on track. Didn’t do anything on the Kubota the last two days because I was busy cleaning up the mess I made with it. Pressure washed the driveway and sidewalk to remove all the tracks and clay from the parking expansion project. The missus made me throw away my favorite (really old) pair of sneakers. They were only 6 years old. They went to Scotland, Ireland, and Australia and have given me countless hours of service in the yard. Farewell and adieu my old New Balance 608’s. Did I mention that bleach and dead algae stink like bad fish?
 

cthomas

Well-known member
Lifetime Member

Equipment
LX2610 HSDC
Jan 1, 2017
865
579
93
La Farge Wi
Still digging holes and making the rotten wood poles stronger with steel I-beams. Can't believe the stuff this shed has collected in 60 years. I did leave the weird looking wires alone(asbestos covered?).
20230608_125259[1].jpg
 
  • Like
Reactions: 4 users

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
Quick sewer line issue. After several attempts to get this line patched with the trenchless tools (trenchless spot repair) the bladder got stuck in the line. So, I got the call to get it out of there.

diggy

View attachment 104650

found it:

View attachment 104651

pipe

View attachment 104652

backfill

View attachment 104653

View attachment 104654

done in under 3 hours...and I didn't do any digging. Ground was bone dry and hard as a rock. Had the youngsters do it all but backfill! ;)

View attachment 104655
I like the cans of primer and glue taped together with red tape.
They are easy to see, and do not fall over as readily.
 
  • Like
Reactions: 1 user

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,289
6,277
113
NW Montana
Where did you find drill stem for $85 a stick?
My fence contractor has been negotiating from $150/stick down to $105/stick for about a year.
I need 1712 linear feet just for top rail. :eek:
Last weekend I was the winning bidder on a lot of ten 20ft pieces of 4" Sch.40 pipe (galvanized) which looks like it might have been used for a pivot irrigator or something. I got the lot for $108 which works out to be $0.54/ft.

Drill stem is regularly for sale up here on Craigslist and similar. Here's a typical price range.

  • 3/4” sucker rod 25’ lengths, 50 per bundle. 15.00 per rod
  • 7/8” sucker rod 25’ lengths, 50 per bundle. 17.00 per rod
  • 1” sucker rod 25’ lengths, 50 per bundle. 19.00 per rod
  • 2-3/8” pipe 40’ lengths, 1/4” wall thickness. 80.00 per stick
  • 2-7/8” pipe 32’ lengths, 1/4” wall thickness. 85.00 per stick
Here's another listing in my area.

  • 2-3/8" X 31' STICKS OF DRILL STEM. $74.00 EACH
  • 2-7/8" X 31' STICKS OF DRILL STEM. $90.00 EACH