What did you do to or on your Kubota today?

[Lil Foot]

Gotcha. Gotta love kids!

 

[Yamaha]

Building fence with SVL-95-2s and auger

 

[Yamaha]

Not today but what a job !
Had to pump down to find the pipe !

 

[shootem604]

Started building a 3 point pallet fork/carryall. Have to do a little welding yet, and then paint. Also tacked together the frame for my 3 point scraper made with half of an old skidder tire. Maybe finish them this weekend.

 

[JeepinMaxx]

Adapted my leaf sucker to my Kubota and tried it out this evening:

Before:

After:

The combination of the MMM and Cyclone rake engine turns leaves into confetti/1/4 stamp size! Did a 1/4 acre on one dump...

 

[RCW]

Mower deck off and fall service.

317 total hours, 64 hours in the last year.
Doing HST Fluid/filter / screen cleaning also. Last done at 38 hours.
Will hope for a better day to do Tire chains. May not put FEL on, don’t have a need now....snowblower time is coming....

Had a few big filings in my first change. Screen looks very clean this time.

For what it’s worth, I found a spot where a bunch of grass clippings get jammed in above the bottom frame, aft of the lift pump. Never noticed it before, and it’s not a mouse nest.
I think it’s about under the battery on a BX. Good place to check if you mow a lot, like I do.

Sent from my iPhone using Tapatalk

 

[highonrunning90]

After over a month waiting, i finally took Delivery of my B2650 and put it right to work on the driveway. Long overdue rutting abd wash-outs dissapeared within a few hours.

What a great feeling accomplish a task in such comfort. [emoji16]

Sent from my LGUS215 using Tapatalk

 

[Yamaha]

Used the batwing ...
clipping fields

 

[Blkvoodoo]

it started small 1A school, only needed one utility trailer to haul all their percussion



but it grew into a monster 4A schools, needing multiple trailers and tractors.

was a good time !

the first of four years of this crazyness !

 

[OhioOrange]

I fixed the "Loss of Power" at full throttle. I chased the problem first by changing the fuel filters, then cleaned the fuel cap vent. That did not solve the problem, still no power at full throttle. I then decided to remove the fuel line from the first fuel filter. I noticed that it did not flow very well by gravity. I used compressed air to blow it out from the fuel line to the tank. It sent fuel into the air from the fill and removed the problem causing fuel starvation. If the problem returns then I know the tank has debris and will clean the tank and that should solve it.

 

[RCW]

After over a month waiting, i finally took Delivery of my B2650 and put it right to work on the driveway. Long overdue rutting abd wash-outs dissapeared within a few hours.

What a great feeling accomplish a task in such comfort. [emoji16]
Sent from my LGUS215 using Tapatalk

I would look into a box blade or grading scraper for that. You'd be surprised what you could do!

Just a suggestion, and welcome!

 

[Fordtech86]

‘Bota was busy this weekend, used the rake to pull some downed limbs to the burn pile, pulled the splitter out to a pile of logs that have been down a while, split a little of that before I started getting into fire ants and termites, and had to kill a snake in there. Gave up on splitting that stuff and hauled it to my brush pile whole to burn. Then since I stirred up the ants and termites I had to spray for the bugs. Today I cleared some more brush to add to the pile

Sent from my iPhone using Tapatalk

 

[otter]

Sorted out the troublesome relief valve on the backhoe boom lift thanks to help on this site, then dug out two birch stumps, hosed off Baby and put her on blocks for the winter with a fresh 400 hour fluid/filter servicing 6 hours ago.
Ground is freezing up but no snow yet.
Sleep well Baby.

 

[Mainah]

After over a month waiting, i finally took Delivery of my B2650 and put it right to work on the driveway. Long overdue rutting abd wash-outs dissapeared within a few hours.

What a great feeling accomplish a task in such comfort. [emoji16]

Sent from my LGUS215 using Tapatalk

Congratulations on the new tractor! Beautiful picture btw. I was born in Eastport and I love the whole Downeast area.
I agree with a box blade though, or a land plane for a driveway like that. Then finish with the York rake.

 

[SidecarFlip]

Replaced the fuel cut solenoid on the M9 this morning. First component failure in over 10 years. Dang thing cost over a hundred bucks. Finally ordered the 540-1000 pto kit for the M9 as well. That will take some work to install. Have to pull the back cover on the transmission and drain all the fluid.

 

[Scottsjeeprolet]

Got my bent bucket replaced today. Noticed when I picked up my new BX it was bent. They came out and replaced it today.

 

[Fordtech86]

Loaded mine on the trailer to pull the trailer for trick or treating tomorrow,calling for 1-2 inches of rain tomorrow night so it may just spend the night at work

 

[mdhughes]

Took the L3901DT with the backhoe over to a friends to dig a trench for new water pipes for wood burning boiler.

 

[Fordtech86]

Took the ‘bota trick or treating


Sent from my iPhone using Tapatalk

 

[flyidaho]

Took a load of clean fill, excavated with the U25 mini excavator, as part of my project to add onto my pole barn an additional 30' by 13', out to the end of the driveway. Using the tractor to move the 5 ton dump bed trailer around is perfect, and so much easier then using the pickup. I dumped it to enlarge a bit the drive entry, it's radius coming off the county road, and as long as I happened to have my 54,000 lb. 30 ton (capacity) boom truck home that day I used it to compact the dirt by making repeated runs over it, perfect!