New profile posts

Yes I was able to find an after market one at the local Kubota dealer. Thanks. Glad to see the site back up and running.

hey Ed what is the reason behind the 2 stage dump spool on my tractor. What would i use that for?Every time i push it all the way to the right it does nothing. Frank

I can get you the file I created and send it to you. The link below should be able to print you out a few for samples. I'll send you the file tommorrow from work if you are interested. I am not in the position to have more made since I do not have personal access to a 3d printer. Let me know.

John

http://www.3dimensiondesign.com/quote/

Mark- I got those stabilizer arms from you and turns out I wont be needing them. If you have any interest let me know.... if not that is ok to- they were for the B3300SU.

HI Vic
I am in the market for a 3PT hitch for my B7001. Do you have one in stock and what is my price or can you help me find one in Canada. I would need it shipped to Nanaimo BC.
Don Carmichael, dondc@shaw.ca

gear oil what weight oil is recomended for rck54*22bx gear box

Ok ill try hold glow plug a lil longer to c how that duz

Got the stabilizer arms today- look good, welds are nice... good job- thanks alot!

Hey Vic
I am on the search for the decompression lever (the actual rod itself that goes from the mechanism and out through the dash) I was able to locate all of the other parts I needed with exception to this one piece, turns out it is a discontinued part. I thought I would touch bases with you real fast to see if you have any resources that may still carry this part or have one buried in a warehouse somewhere? Thanks in advance for your time and assistance. I guess I should have led with this bit of info, it's for a b6000. Thank you sir.

I posted regarding the hydraulic remotes, but didn't get a reply. Did you see it?

Glow plug are fine but i did find the amps range between 9-10.50 on each one. Should they be reading 12 when glow plugs are turned to on?

I'm not surprised, I didn't expect retarding the timing would correct cold misfiring. retarding it further probably wouldn't help either and 14 degrees is not enough for smooth full throttle operation. you can easily check the glow plugs, simply remove the metal bar connecting them and test them with a testlight. put the clip from the testlight on battery positive and touch each glowplug with the testlight probe the light should illuminate for each one.

I'm not surprised, I didn't expect retarding the timing would correct cold misfiring. You can easily check the glow plugs, simply remove the metal bar connecting them and test them with a test light. hook the clip on the test light to battery positive and touch the probe to each glow plug, the light should illuminate for each one

Hi Ed, Ya it did the same thing this am but not for as long.that was at 8.30am so for curiosity i pluged it in while it was in the garage still and 3hrs later i tried it and it started right up no smoke at all. maybe we have to go a little further in the shims and bring it to 14TDC. What do u think? Is there away i can test the glow plugs?maybe there is a bad plug.

Drop by, share your ideas, come visit if you like.... we dont bite.

dedgin,
I make them for all sizes of Kubota's. The majority of what I make is for your size tractor- the post was about moving into the extra-large territory.
I make 4 size sets, and I would recommend for your tractor a medium set. They are substantially larger than the stock turnbuckles, but not so big an bulky that they interfere on your tractor or look funny. A complete set of two painted stabilizers with all hardware is $130.00. I can ship them anywhere in the continental US for $15.00, higher if you are somewhere else. Just let me know if you have any further questions.
Blessings,
Mark
www.stabilworks.com
http://www.youtube.com/watch?v=xeh23Csx1QM

Hi ,Kubota Man,Sorry to disturb you but I am new here and maybe you know better how it's call the shaft which make the front axe turn.Mine is finished and I'am looking for a new one for a long time.
Best regards,Gabriel

Hi Vic you should be paid for all your help it is greatly appreciated. Do you know where to get a exhaust manifold for a DH 1101 3 Cyl.

Hello everyone love this site my kubota b21 only has ront wheel drive , I am not sure what is going on as I have just purchased it .The unit is a 4x4 hydrostatic?Any help would be greatly appreciated.

Hi Vic,

Do you have or know where I can find a splined coupling/adapter to fit the front output section of the crankshaft on a L1500DT?

I am wanting to add another hyd pump to my rig, I watched your vid on tapping the existiing system and that is something I might do also, but I really want another seperate system.

Thanks

Paul AKA South 40