What kind of chainsaw you have?
- Thread starter RCW
- Start date
the 610 won't fire , parts not around to buy
bought a new CS-590 yesterday , seems to have good power
CaveCreekRay
Well-known member
Lifetime Member
Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
Three Huskies and a like-new electric Craftsman I bought at the thrift store. Used the Husky extendable pole saw today.
If you are having problems finding ethanol free gas go to any marina or airport that services small piston powered aircraft, ask for 100 low lead. At either place it will be more expensive than at the gas station but that is minor problem to the use of ethanol in your fuel.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Toyman
Active member
Equipment
B7100HST, 1630, 4' Tiller, 4' Brush Hog; Mahindra 5005/Loader, Woods Cadet 84,
10 year old Poulan Woodshark. Did some tuning and changed out the fuel one and filter and it***8217;s been very good. I use it for my ***8220;dirty saw***8221; stumps and such. From there I picked up a Jonsered 2250 with an 18***8221; bar. World of difference from the Poulan. Last year I picked up a Huskie 435 for $150, Refurbed. It***8217;s really been good and my go to saw.
Last edited:
I drug in some two foot + red oak bolts to saw up for stove wood. Grabbed the McCulloch Pro Mac 10-10 to whittle down the lengths.
Positively ripped through those rounds. Too heavy to carry far from the pile though.
I do enjoy that barking exhaust note. In these days of 50:1 mix oils, I worry about the old gal needing 32:1. ;-)
Positively ripped through those rounds. Too heavy to carry far from the pile though.
I do enjoy that barking exhaust note. In these days of 50:1 mix oils, I worry about the old gal needing 32:1. ;-)
Bmyers
Well-known member
Lifetime Member
Equipment
Grand L3560 with LA805 loader, EA 55" Wicked Grapple, SBX72 BB, LP 1272 mower
Husqvarna 562XP-G (heated grip)
Jonsered Silvertop
I tend to prefer Husqvarna. I bought a new Stihl KM130R and had fairly major problems with it, eventually resulting in a new unit being given to me under warranty, which I still have. The attachments have had issues as well. Here's my list:
Husky 562XPG saw
Husky MZ-T52 zero turn mower w/ Kawasaki FS651 engine
Husky 525 straight-shaft trimmer
Husky 535 straight-shaft trimmer
Husky 524 split-shaft trimmer with Honda 4-stroke engine
Husky 122HD hedge trimmer
Husky 580BTS backpack blower (2x of these)
I've got a fair amount of other small engine equipment, but for someone who never even liked Husqvarna, I'm pretty much a total convert at this point. Great luck with all of this, even though there is no dealer in town.
Jonsered Silvertop
I tend to prefer Husqvarna. I bought a new Stihl KM130R and had fairly major problems with it, eventually resulting in a new unit being given to me under warranty, which I still have. The attachments have had issues as well. Here's my list:
Husky 562XPG saw
Husky MZ-T52 zero turn mower w/ Kawasaki FS651 engine
Husky 525 straight-shaft trimmer
Husky 535 straight-shaft trimmer
Husky 524 split-shaft trimmer with Honda 4-stroke engine
Husky 122HD hedge trimmer
Husky 580BTS backpack blower (2x of these)
I've got a fair amount of other small engine equipment, but for someone who never even liked Husqvarna, I'm pretty much a total convert at this point. Great luck with all of this, even though there is no dealer in town.
RCW
Well-known member
Lifetime Member
Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Cut up a maple I had pushed over while a guy was here with his excavator.
Felt good to run both the saws, and run the gas out for winter.
Gave them both a sharpening before putting away.
Sent from my iPhone using Tapatalk
Felt good to run both the saws, and run the gas out for winter.
Gave them both a sharpening before putting away.
Sent from my iPhone using Tapatalk
3 Stihl's and a Tanaka arborist, top handle saw. 028 Wood Boss, 056 and 075 with a 4 foot bar. Tanaka (Mikata) has a 12" trim bar. 325 pitch on the 2 smaller saws, 1/8" lo pro on the Tanaka and .404 skip tooth, flat tooth cross cut ripper on the 075 (takes serious power for that).
I leave gas in them all winter. Stihl pre-mix has stabilizer in it, but then I use them in the winter once in a while. Same with my FS66 brush trimmer. Gas all winter, never an issue.
Use Stihl engine oil (pre-mix) and Husky bar oil (when it's on sale, buy a couple gallons).
I leave gas in them all winter. Stihl pre-mix has stabilizer in it, but then I use them in the winter once in a while. Same with my FS66 brush trimmer. Gas all winter, never an issue.
Use Stihl engine oil (pre-mix) and Husky bar oil (when it's on sale, buy a couple gallons).
CaveCreekRay
Well-known member
Lifetime Member
Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
3 Husky's (14", 18" and a 14' pole saw)
1 Echo Commercial 18"
2 electric chainsaws for quickie cuts near power.
1 Echo Commercial 18"
2 electric chainsaws for quickie cuts near power.
Been tempted to buy one of those electric jobs (with the rechargeable battery) but I haven't. With my good luck, the battery would die about half way through a cut.
Besides, I'm not very 'green' in the first place.
Besides, I'm not very 'green' in the first place.
CaveCreekRay
Well-known member
Lifetime Member
Equipment
L3800 HST, KingKutter box scraper, KingKutter 66" rake, County Pride Subsoiler
Where you live it's good. Where I live, not so good. When the sun don't shine there is no juice.My electrics run on solar power -mine! (They are 115VAC)