What did you do to or on your Kubota today?

[Hugo Habicht]

I gotta check the warranty period…

Won't help.
With the paint fully scraped off they will claim abuse ...

 

[MOOTS]

I do - I put a new piston and cylinder in it and use it as my spare small saw. Sorry....

After 14 years


View attachment 164999

Rehabbed

View attachment 165000

gg

You knew where I was going with that question! Glad to see it’s still making BTU’s! If the OEM cylinder is still around, I’d be interested in that too.

 

[Old_Paint]

Better in your bucket than running down your leg - don't ask how I know. Since then I keep telling myself when ever I fill anything "put on both caps before you move your feet".

gg

I tell Myself what to do all the time. He doesn't listen. I think he's hard of hearing.

 

[gmbc]

If you did something to or on you're tractor today and you don't want to start a new thread then post it here

I installed a horn I took from a tiny Toyota and then installed a decompression cable on mine today. Was going to do a little grading on the drive but got tired
Gurn

I cleaned out heater coil and condensor since roof blew off and am repairing it.

 

[g_man]

You knew where I was going with that question! Glad to see it’s still making BTU’s! If the OEM cylinder is still around, I’d be interested in that too.

Unfortunately it is long gone to the metal recycling dumpster at our town transfer station.
I think the 346XP was one of the best 50cc saws made.

gg

 

[S-G-R]

I don't know what your snow loads are up in PEI but around here in NE VT only the very robust units survive the heavy wet storms or rain on top of existing dry snow.

gg

Typically the wind also keeps the roof clean of snow where I am. Good for one thing and bad for others.

 

[mdhughes]

Went to use the grapple yesterday to move some logs and things didn't work out.

One of the micro switched in the 3rd function handle quit working.

Had to go back to the old way of doing things.

I have things working again (for now). The 3rd function handle uses sub-miniature switches, but all I could find around the house was ultra sub-miniature switches (old mouse). So I 3d printer a filler to hold the ultra sub-miniature switch in place in the handle. I'm not sure how long the switch will take that current draw, but it got me back up and running.

I do have the correct switch on order, but it is going to take a week to get here. I order 5 so I would have some on hand when the other switch dies. The cost of shipping is so high for something that doesn't weigh anything. I really miss having a store to go to to get stuff like this. Even Radio Shack back in the day was better then nothing.

 

[chim]

The poor Kubota had to sit and watch the little Ford do some Fall cleanup today. It was tempting to hook the 5' RFM to the Kubota but its been a long time since the Ford did much of anything. The 5' deck had to be the one because it's a side discharge. The RFM on the Kubota is rear discharge.

The deck has been outfitted with Lee Frake blades that work well.