What did you do to or on your Kubota today?

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,301
6,292
113
NW Montana
It should be a law, that EVERY Kubota be kept in a proper building!;)
Yeah right. A stored tractor that never gets used is better than one that's used almost daily but stored outside.
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
Yesterday I got my weight box installed on the tractor and it was already prefilled with "silver bars" There are over 650 lead ingots in there and each weighs approximately 1 1/4 lbs. or approximately 730 pounds of weight plus the weight of the ballast box itself. This gives me enough traction to both snowblow and plow all winter with turf tires.
MVC-002L.JPG
MVC-003L.JPG
 
Last edited:
  • Like
Reactions: 6 users

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
Last night, everything is ready for the first snowstorm of the season. On the side of the tractor is my snow plow for cleanup after I blow off the majority of the snow, the snowblower (BX2816 that is looking for a new home) that I used before I got the BX2822, and the snowblower V5265 that I purchased this summer hoping to find an RTV to use it on.
MVC-001L.JPG
MVC-004L.JPG
MVC-005L.JPG
MVC-006L.JPG
 
  • Like
Reactions: 5 users

Gaspasser

Active member
Lifetime Member

Equipment
L6060, FEL, forks, front snowblower. KX033 mini ex. Dump truck, Husqvarna saws.
Dec 16, 2023
175
226
43
NH
Good........because I am guessing that the trusty groundhog will be forecasting extra weeks of Winter in NH.
There will also be one extra day in February! :ROFLMAO:

P.S. Don't forget to leave the hood UP, while stored.
Mice just love to chew wiring, and make a home in dark places.
Leaving the hood up helps to deny them that cozy hiding spot.

D-con or similar, ....is the best option,..... if domestic animals do not have access!
Thanks for the tip... would not have thought to do that. @$#@$%& mice!! They have taken residence in my chipper, truck, cars previously. I have a variety of traps and poisons set up. I have the most success with peanut butter as bait and the old fashioned wooden spring traps. Sticky traps work best in warmer temperatures. in winter, the sticky traps harden and don't seem to be as sticky. I have an ozone generator and use chlorine dioxide tabs for removing odors. That and changing air and cabin filters as well. I've also noted that dashboard components/duct work often have a cloth or foam lining ( vibration or noise suppression?). I wind up stripping that out where I can reach it.

I typically respect all life and try to be humane. But when it comes to those destructive rodents, it's war.
 
  • Like
Reactions: 1 users

trueg50

Member

Equipment
B2601
Jul 1, 2020
60
77
18
Vermont
Ground finally froze for a bit a week or two ago so I was able to get out and skid some logs. Managed to get a chance yesterday as well to pull some more out from a steeper part of the property (before we get too much snow for it to be inaccessible). Not is good as a winch, but it beats cutting it to length, loading on a trailer etc.. Instead I pull them to the road, cut to 80" (5x 16" lengths) then push to the side for when I have the grapple on and can move them to the woodyard.

20231221_124209.jpg
20231221_133735.jpg

20240106_130908.jpg
20240106_130036.jpg
 
  • Like
Reactions: 10 users

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
Peppermint oil on cotton balls is one of the best repellants that I have found. I also use whole cloves to place on paper plates when the cars are in storage. Some people have told me that they use rubber caps on the exhaust pipes to keep the mice from building nests inside the mufflers, but I have never had that problem. The peppermint oil on cotton balls is a must in the engine compartment.
 
  • Like
Reactions: 1 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,301
6,292
113
NW Montana
More fun blowing and pushing snow today. Only a little over an inch but still worth moving.

mx6000_blowing_snow_01-07-24.jpg
 
  • Like
Reactions: 4 users

mcmxi

Well-known member
Lifetime Member

Equipment
***Current*** M6060HDC, MX6000HSTC & GL7000 ***Sold*** MX6000HST & BX25DLB
Feb 9, 2021
5,301
6,292
113
NW Montana
EXACTLY CORRECT !
Some buy tools to look at whereas others buy tools to use. I buy a drill because I want to put a hole in something, not because I want a drill.
 
  • Like
Reactions: 1 user

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
Peppermint oil on cotton balls is one of the best repellants that I have found. I also use whole cloves to place on paper plates when the cars are in storage. Some people have told me that they use rubber caps on the exhaust pipes to keep the mice from building nests inside the mufflers, but I have never had that problem. The peppermint oil on cotton balls is a must in the engine compartment.
I am away for the entire Winter, every year!
A 294 year old house, and two (much newer) storage barns.
D-con, D-con, D-con.....lotsa D-con !

I also have a strobe light on a timer, in the old house root cellar, to discourage the #&%@*^, raccoons.
They have hit me hard twice, and they do not touch the D-con!
They also do not like radios!
 
Last edited:

Jsjac

Active member

Equipment
B2650
Feb 13, 2022
173
236
43
New Hampshire
I have the flu,and we got a foot of snow.
I helped our daughter get the snow blower on the tractor yesterday.
She is out doing the driveway now.
I have to just let her go at it on her own. She is super safety conscious so I don't worry about her much.
Not as good of a picture as MCMXI but I had her park it near the house.
IMG_20240107_171646898.jpg

Usually park it in the tractor shed.
 
  • Like
Reactions: 6 users

RMS

Well-known member

Equipment
LX2610HSDC, RCR1260, PFL1242, LX2963, RB1684, WC-68,Flail Mower,Grapple, Z421
Sep 26, 2021
220
409
63
Buckfield Maine
Just finished clearing the 9 inches of snow that we got today. This was the primary reason to buy the cab lx. All of the other stuff I get to use it for is all a bonus in my mind!
 
  • Like
Reactions: 3 users

Old_Paint

Well-known member
Lifetime Member

Equipment
LX2610SU, LA535 FEL w/54" bucket, LandPride BB1248, Woodland Mills WC-68
Dec 5, 2020
1,733
1,730
113
AL
Moved some concrete debris from other projects with the grapple to Cluckingham Palace to break up into rip-rap for critter proofing the run. Lined the inside perimeter with chunks that’ll slide into the hole if something digs in, and will do the same on the outside after I get the mesh installed.
51F121C0-35B2-4FAC-B59A-E102139B3642.jpeg

5640AAA3-EAEF-4C4B-A03F-42591BBACD2D.jpeg

Pity I wasn’t angry about anything because beating on concrete with a 4 pound hammer is very therapeutic. The concrete is bits I cut out earlier this year when I built a gravel parking area and put a drain under the existing driveway. So far, the only cost in this project is the sheet metal on the roof and the fasteners to assemble the whole thing. All of the lumber is from 2 deck rebuilds, Might have to call the ties purchased, but they were actually purchasedfor the parking area project, so I already had them. Used a lot of scraps I had laying around serving no other purpose besides termite food. I still have nearly 1000 bricks that I might line the coop floor with.
 
  • Like
Reactions: 6 users

Nomore67

New member

Equipment
Currently own- B2601, LX4020. Previously owned- BX1870, B2601
Apr 28, 2019
17
23
3
Minnesota
Couple of simple additions to the LX4020... Added a little extra weight to the box blade for more traction, 👍. And, added an ammo box toolbox onto the slow moving vehicle bracket, 👍.
Finally a little snow to try out the LX4020 😎👍!
I added some more rear weight for traction, it's working very well with the new R4s!
*Rough numbers- about 300lbs for box scraper, about 530lbs in suitcase weights. For just over 800lbs off the back to reduce spinning.
 

Attachments

  • Like
Reactions: 6 users

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,743
855
113
New Hampshire
Yeah right. A stored tractor that never gets used is better than one that's used almost daily but stored outside.
It’s not better, It’s a waste of a good tractor if it never gets used!!!
 

River19

Well-known member

Equipment
B2601, RB1560, BB1260 and BX2830 blower
Sep 10, 2020
327
508
93
NH/VT NEK
Finally got some snow here in NH......10-14" of nice powder which will be a mess in 36hrs as we are set to get another 2-4" of snow then 1-2" of rain tomorrow night.......

Repaired blower worked well as it should for a $700 repair on a "commercial" blower with <35hrs on it. We'll see how it holds up. I'm tracking the wear on the coupler after use, once it thaws out a bit today I will remove the cover and take a couple more pics for documentation as I treated it like a fragile egg this trip out.


IMG_5802.jpeg
IMG_5807.jpeg
IMG_5808.jpeg
 
  • Like
Reactions: 6 users

leveraddict

Well-known member

Equipment
2017 BX23S 60" LP BoxBlade 54" mower 60" BackBlade EA 12" 1 bottom plow & Forks
Apr 1, 2019
907
589
93
NEPA
Cleaned a foot of snow sitting comfortably in the BX23S with my original tractor cab and heat! I had to strip down to the t-shirt! :D
 
  • Like
Reactions: 3 users