What did you do to or on your Kubota today?

[fried1765]

Katy contributed to her new home. First, she moved the stack of siding to the other side of the floor so I don't have to carry it so far.
Then she held the sheets up while I nailed.
View attachment 111687

I note that you are using chain to prevent stabilizer droop.
I have found that a simple lightweight ratchet strap, between the stabilizers themselves, is very adequate.

 

[edritchey]

Added my bolton hooks that Ken sent me

And a LED light bar so I can see to use the backhoe after dark.

 

[Bmyers]

Mowed today. I think we may need some rain. I had cleaned the tractor before I started mowing. Thankful I have a cab.

 

[hoot owl]

My work for after church tomorrow.

We were in Pa. for 2 week for a family wedding. Our son went out to check the house and found this hanging in the drive. You can just get past it on the right if you fold the mirrors in.
He is coming out the drive in this photo.
The one closer to his car is from a storm back in August. 42 logs for the saw mill from that storm.

 

[Mr. K]

Just want to pop in here in amazement that this thread is >10 years old and still gets updated multiple times a day! Wow!

 

[Mak65]

At 192 hours, but before I get to the 200 hour maintenance window, I decided to change the front axle fluid to 80w-90 gear oil.

I recently had back surgery and per doc I am still limited on bending, twisting. I could do this without having to stoop, twist, crawl on the ground, or lay on back on ground. Well, within reason anyways.

Got it done. Messed around a bit.

And, then sat back and watched a slow, steady rain fall for a couple hours. With Texas in the drought it’s in, it was the first rain I have seen in a couple of months. It was relaxing just listening to it on the shed’s metal roof.

 

[mdhughes]

Used the bucket to carry the two batteries for my truck from the garage to the truck. I had taken them out to work on another truck that a friend has.

 

[Siesta Sundance]

At 192 hours, but before I get to the 200 hour maintenance window, I decided to change the front axle fluid to 80w-90 gear oil.

I recently had back surgery and per doc I am still limited on bending, twisting. I could do this without having to stoop, twist, crawl on the ground, or lay on back on ground. Well, within reason anyways.

Got it done. Messed around a bit.

And, then sat back and watched a slow, steady rain fall for a couple hours. With Texas in the drought it’s in, it was the first rain I have seen in a couple of months. It was relaxing just listening to it on the shed’s metal roof.

Glad you got some rain, every rain shower out there has seem to skip us, not a drop here.

 

[Mak65]

As my late father back in the day used to joke when his farm needed rain…

You could watch it pour all the way to the fence line, part like the Red Sea and rejoin back together at the other fence line.

Pulling for you. It can‘t avoid you forever.

 

[PoTreeBoy]

I note that you are using chain to prevent stabilizer droop.
I have found that a simple lightweight ratchet strap, between the stabilizers themselves, is very adequate.

It was like that when I got it. I think the chains are more for boom swing and sag, neither pin is installed.

 

[nbryan]

Just want to pop in here in amazement that this thread is >10 years old and still gets updated multiple times a day! Wow!

Indeed! gurn asked the right question, at the right time.

 

[Trapper Bob]

I was out mowing broom sedge & some blackberry brambles I had sprayed previously, when ran across some prickly pear cactus. The cactus doesn’t go well with the brome grass so it must go away.

 

[leveraddict]

Indeed! gurn asked the right question, at the right time.

Gurn just wanted to see how many tractors were just sitting in garages getting waxed and mods done to them while the owners sat and stared at their tractors while on OTT! Hehehe LOL!

 

[NCL4701]

Dug a hole to bury the cat that passed away recently. Wished a time or three I’d gotten the backhoe. Used the bucket as a wheelbarrow for the spoils.

Later switched to the grapple and shoved the top 30’ of a 60’ dead maple tree off one of the trails. Thought about cutting it up and chipping it but had other stuff to do so just spent about 15 minutes pushing, breaking, piling, and grabbing pieces from where they were stuck in nearby trees. So now there’s a small brush pile near the trail but it’s down in the woods so maybe I’ll clean it up some more this winter. Or not.

Failed at taking pics. By the time I started good on the tree it was over.

 

[aaluck]

Just want to pop in here in amazement that this thread is >10 years old and still gets updated multiple times a day! Wow!

Love it and daily chuckle. I look at both daily and contribute when I can.

 

[mcmxi]

I spent about 5 hours cutting my friend's fields yesterday afternoon/evening. I like the 540E option on the tractor. I ran around in mid range 4th gear for the most part (1,800rpm) but it was on the bumpy side. I cut his field in late June when it was a lot taller and thicker so this went faster. This was the last cut for this year and I always enjoy helping him out. We loaded up the trailer as the sun was setting. A good day for sure.

Time to unload the M6060 from the trailer and change the oil.

 

[Trapper Bob]

We received a little rain last week & my wildlife plots are coming up. The temps are slowly dropping. I better get my deer stands ready. I put them back in the same places as last year, which makes trimming easier. A little more practice with the bow & I’m ready.

 

[aaluck]

We loaded up the trailer as the sun was setting.

What size trailer is that?

 

[mcmxi]

What size trailer is that?

It's a 22ft model with two 7,000lb axles. So far it's proving to be a good investment for what I need.

Deckover Tilt Trailer (T8) | PJ Trailers

Looking for a durable and reliable deckover tilt trailer? Check out the T8 model from PJ Trailers. Built for heavy-duty use and easy loading/unloading.

pjtrailers.com

 

[WE349a]

Added the second air filter to my L2502 because I live in a very dusty environment.