What did you do to or on your Kubota today?

RichardAaronlx2610

Well-known member

Equipment
Lx2610 Cab, Fel, Backhoe, Grapple, Box Grader, Forks
Aug 3, 2021
441
490
63
New Jersey
With the AC working again, I have been rapidly finishing up my firewood hauling for winter 2022-23.
Been cutting mostly blighty beech .
The first shot was taken amidst some of 2021-22's supply.
2nd shot looking back at the stacks.
How many cords do you burn per season?
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,022
3,676
113
Wind Gap, PA
What are those bits in and near the drill…curious…
I really don't know. The pic is of the cable company tech making the repair. It took them about an hour for the repair on that one.

Lots of reasonable excuses. But ultimately, I'm the one who had the hands on the control sticks.
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
If dig safe didn't mark it correctly, then they own the problem. If you don't call in advance, then the error is on you. My electrical and cable lines are 6 feet down in schedule 40 electrical conduit. At 2' there is plastic warning tape in the ground, and also at 4'. There should have been warning tape above the lines that you snagged. Whomever installed them, went cheap and omitted the warning tape. Most likely an independent contractor for the cable company.
 
  • Like
Reactions: 1 user

lynnmor

Well-known member

Equipment
B2601-1
May 3, 2021
1,444
1,159
113
Red Lion
I called before digging and they reported that there were no underground utilities in the area where I was digging. So I removed the stumps right alongside the pole that had both telephone and cable lines going down in the ground. Luckily no lines were hit but I wouldn't put much faith in those folks.
 

Porcupine

Active member

Equipment
L2501
Jun 15, 2021
125
153
43
NC
I put out a hay bale before work.

Likely to turn out to be the best part of my day at this rate. ;)
 

Crash277

Well-known member

Equipment
BX23S
Jan 17, 2021
846
622
93
Canada
I called before digging and they reported that there were no underground utilities in the area where I was digging. So I removed the stumps right alongside the pole that had both telephone and cable lines going down in the ground. Luckily no lines were hit but I wouldn't put much faith in those folks.

There was a big investigation and a bunch of fire trucks at a friends house.. the did the call. got the Ok to isntal a fence. rented a post hole auger and went to work...... hit a gas line!! once everything was cleared safe. There were a pile of people asking to see the diagram. The line in her backyard wasnt on any of the city or county maps.
 

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,878
2,292
113
central ct
If dig safe didn't mark it correctly, then they own the problem. . . .
One could only hope. Not necessarily true in the real world. Several years ago I hired a company to remove an underground oil tank next to my house. I have underground services.
They dutifully called CBYD who sent out a company to mark everything. Bottom line - they were off by 5'. Excavator hit the 400amp service just enough to pull out the neutral from the box in the basement. Didn't realize there was a problem for 3 days. Over $40k in damage.
My insurance company settled for 75% from the CBYD company and the excavator. I was stuck with 25% of my deducible and months of bullshit things we found later.
 

gunnersguru

New member

Equipment
L4701
Aug 12, 2021
16
19
3
SEMO
i signed papers on a new L4701HST , R4 , FEL square back bucket , level rod right side grab handle and had the dealer throw in all 50hr maint items .
 
  • Like
Reactions: 7 users

wgator

Active member

Equipment
L4701HST, FEL and other stuff.
Jul 28, 2018
482
147
43
NC
i signed papers on a new L4701HST , R4 , FEL square back bucket , level rod right side grab handle and had the dealer throw in all 50hr maint items .
I've had my L4701 HST, R4's for 6 years. I guarantee you'll be happy with your's. No one will be able to knock the smile off your face even with a 20 lb sledge hammer when you get it.
 
  • Like
Reactions: 1 user

ItBmine

Well-known member

Equipment
B2620, RTV-X1100C
Jan 21, 2014
1,375
378
83
Canada
Put rear view mirrors on the RTV today for when snow plow season starts. Boss plow still isn't in yet though, even though I ordered it in the spring.

And had a look at the gas version while at dealer to replace my Polaris atv with.

And wanted to try an L2501 but they were all still in the crates.
20210812_172543.jpg
20210812_132935.jpg
 
  • Like
Reactions: 3 users

UpNorthMI

Well-known member
Lifetime Member

Equipment
L3200, L3901, MX5800, SVL75-2, KX040
May 12, 2020
850
568
93
Up North, MI
Recently did a little late corn planting, to give the deer something to eat as the first frosts or snow comes.

Rototiller.jpg
Corn Planter.jpg
 
  • Like
Reactions: 4 users

UpNorthMI

Well-known member
Lifetime Member

Equipment
L3200, L3901, MX5800, SVL75-2, KX040
May 12, 2020
850
568
93
Up North, MI
The wood clear up is a constant task, got the old buzz saw out for a large stack of small diameter cuts. Killed the 40 year old buzz saw gearbox, guess the oil seals leaked and it did not run so well without any oil on this very hot day! New gearbox on order but delivery is 14 weeks! Upgraded and ordered a new buzz saw, it's Italian but came from a dealer in Canada, hope to get it assembled and test it out this weekend.

The L3200 hauls a heavy load of timber from a large fallen tree in the 8' farm dump trailer. Sure makes life easier when you load with a grapple and unload with the trailer tilt!

Buzz Saw.jpg
Trailering Wood.jpg
 
  • Like
Reactions: 3 users