R4's are a 4 ply tire while R14's are a 6 ply tire.If your working in woods a lot like I do. R4's have thicker sidewalls and presumably less likely to get a flat.
R4's are a 4 ply tire while R14's are a 6 ply tire.If your working in woods a lot like I do. R4's have thicker sidewalls and presumably less likely to get a flat.
My R4s are 6 plyR4's are a 4 ply tire while R14's are a 6 ply tire.
I think you have that reversed.R4's are a 4 ply tire while R14's are a 6 ply tire.
Lots of huge generalizations in your post. I requested R1s, and they were brand new. Im in mud all the time. Any tire will tear up the lawn, it's a tractor.Like 90% of compact tractors leave dealer lots with R4 tires. It's all people want and for good reason. They cost more, but you have the ability to add lots more fluid in and in practice a life time guarantee on wear, punctures, or them sliding off. Don't be 'that guy' who gets the ag tires because the dealer is overstocked on and wants to get rid of them (before they dry rot).
My 2 cents on that is just get the R4 tires. They are proven and work...naysayers will state that ag tires with large cleats do better in mud, but I disagree... If you're in mud, they're all spinning and only different is ag tires dig in more, potentially getting to 'not mud.' The R4s 'float over' better, though none of them work well in thick mud period...tractor becomes a mess and it's sketchy...even a skidsteer/mini-x fails in mud. Now that you got equipment, fix the reason why it's muddy...poor drainage. If it's still muddy 2-3 days after heavy rain, you got some bad grading...common thing in flat areas and unfortunately difficult to fix. Even in dry conditions, ag tires are like mini plows and will turn vegetation into a dirt road in no time.
R14 tires I honestly don't much know. R4's work fine so I don't care too. FYI, all heavy construction 'TLB' or "wheeled loader' equipment have R4 tires standard and you wont ever fine one otherwise.
With proper grade and soil it wont be wet. I guarantee it from person experience. Remove that muddy organic material down to subsoil, put in your lawn, and mine some proper shale/sandy soil, place it there and it wont stay wet if the grade is correct (ditched on uphill side that eventually leads to culvert on the downhill side, if that's where the trail goes. Of course, IMO this will be lots of work to that do with a L series tractor depend on how bad situation is. I will say however, using R1 tires to keep digging trenches wont work so well and mud will just stay mud.Lots of huge generalizations in your post. I requested R1s, and they were brand new. Im in mud all the time. Any tire will tear up the lawn, it's a tractor.
One thing I can guarantee is the R1s grip better going through my creek with a foot of mud on each side. It's not all "bad grading" in the winter when everything stays wet.
I'm guess I'm that guy but I'm perfectly happy with my R1s.
I may have been mistaken about an R4 tire being 4 ply but from what I can find the R14 is a 6 ply tireI think you have that reversed.
R4 tires were designed for industrial equipment like backhoes and loaders for longer wear on solid ground like pavement and some traction. Having thousands of hours of experience running Ag tractors, backhoe and pay loaders, I would never buy R4 tires thinking I would get traction out of them in mud. On snow, they are the worst traction tires out there compared to the other choices. As far as woods work, we spent a lot of time in the woods in the winter with our AG tractors and never punctured any of the R1 tires. We actually had more flat tire problems with the R4 tires than the R1 tires. It’s a big misconception thinking that the R4 tires are tougher considering how most OEM tires are the cheapest ones that the manufacturer can buy.Like 90% of compact tractors leave dealer lots with R4 tires. It's all people want and for good reason. They cost more, but you have the ability to add lots more fluid in and in practice a life time guarantee on wear, punctures, or them sliding off. Don't be 'that guy' who gets the ag tires because the dealer is overstocked on and wants to get rid of them (before they dry rot).
My 2 cents on that is just get the R4 tires. They are proven and work...naysayers will state that ag tires with large cleats do better in mud, but I disagree... If you're in mud, they're all spinning and only different is ag tires dig in more, potentially getting to 'not mud.' The R4s 'float over' better, though none of them work well in thick mud period...tractor becomes a mess and it's sketchy...even a skidsteer/mini-x fails in mud. Now that you got equipment, fix the reason why it's muddy...poor drainage. If it's still muddy 2-3 days after heavy rain, you got some bad grading...common thing in flat areas and unfortunately difficult to fix. Even in dry conditions, ag tires are like mini plows and will turn vegetation into a dirt road in no time.
R14 tires I honestly don't much know. R4's work fine so I don't care too. FYI, all heavy construction 'TLB' or "wheeled loader' equipment have R4 tires standard and you wont ever fine one otherwise.
My experience has been the exact opposite.... I know that some folks claim no issues but my dealer says that unlike John Deere, Kubota hasn't quite got it figured out yet...
There are always exceptions. I had a 2002 Ford Explorer that lots of folks said was riddled with mechanical issues. Had mine 16 years and 200,000 klms without anything other than standard maintenance items. Engine, transmission and transfer case were never touched. Regularly towed the Kubota with it as well.My experience has been the exact opposite.
I suggest going on the Kubotausa website and comparing the price and specs of the LX3302 compared to the L3560LE. That is what I did, and made the easy decision to get way more tractor for not much more money. I got R4s because of my terrain and intended use.The LX is the older model big B. The L is quite a bit more of a tractor, but I think I’d consider the L3560LE and go for the upgraded loader which has almost double the power of a L3602. It also can be changed to be more of a luxury tractor.
Congrats!Thanks to all for your comments and advise.
My new Kubota L3302 arrived today. Cant wait to try out the grapple and get to work on the drive.