Tell Me Dont Be Stupid

WFM

Well-known member
Premium Member

Equipment
L3800
Apr 5, 2013
1,341
671
113
Porter Maine
With this Spring and Summer the rainest on record here in Maine. I put very few hours on my tractor this past summer. I always change the oil spring and fall. But I looked the other day I've put less then 50 hrs on it since the spring oil change. So. I'd still love to change it. But I think the Manuel says every 200 hrs. But even at 50 hrs the oil will be filthy dirty.
But winter closing in fast. So I'll probably just change it before the cold weather sets in.
 

Outnumbered

Well-known member

Equipment
Kubota L3901, FEL, BB1260, RCF2060, FDR2572, Titan Forks, Caryall, 5' Tiller
Oct 26, 2019
214
376
63
Moseley, VA
I am of the 1 year or hours mindset but each of us has to feel comfortable with the decision. More frequent than necessary doesn't hurt the equipment, just your pocket.
 
  • Like
Reactions: 3 users

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,745
2,551
113
Bedford - VA
Never look at oil as dirty - look at oil as time served!
Dirty oil means it is doing its job - but then again 500 hours of dirty oil did its job years ago!

At the cost of an OIL change - do what your heart tells you!
 
  • Like
Reactions: 1 users

fried1765

Well-known member

Equipment
Kubota L48 TLB, Ford 1920 FEL, Ford 8N, SCAG Liberty Z, Gravely Pro.
Nov 14, 2019
7,843
5,066
113
Eastham, Ma
With this Spring and Summer the rainest on record here in Maine. I put very few hours on my tractor this past summer. I always change the oil spring and fall. But I looked the other day I've put less then 50 hrs on it since the spring oil change. So. I'd still love to change it. But I think the Manuel says every 200 hrs. But even at 50 hrs the oil will be filthy dirty.
But winter closing in fast. So I'll probably just change it before the cold weather sets in.
In a diesel, new engine oil will look "dirty" after 4 hours.
Would you change oil at 4 hours?
 
Last edited:
  • Like
  • Love
Reactions: 4 users

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,146
5,219
113
Chenango County, NY
Do mine each fall.

About 50 hours.

Last fall I only had 30 hours.

I let it ride till spring. Was a warm winter, so not a lot of hours over the winter.

The world continued to turn. Sun and moon acted normally.

Just being a smart aleck and poking fun. I’m betting the oil will be just as effective for a while longer 😉

You do spring too…Maybe let it go to spring? Your choice…
 
Last edited:
  • Love
  • Haha
  • Like
Reactions: 2 users

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,821
5,563
113
40 miles south of Kansas City
I look at a lot of decisions to be made to be like finding termites in your home. No need to get wound up and panic stricken. They been there for a long time and a bit more time isn't going to cause the house to fall it!

If not changing the oil causes you to not sleep at night, best to change it. Otherwise next Spring will find everything just fine!!
 
Last edited:
  • Like
Reactions: 3 users

Kubota Newbie

Active member

Equipment
M4500, New Idea Cut-Ditioner, JD 14T Baler, IH "Plow Chief" plows, Oliver Rake
Dec 28, 2010
533
81
28
Mount Vernon, Ohio
Usually spring oil changes for me. I don't put on enough hours a year to require 2 oil changes and the tractor lives in a unheated barn all winter. My rationale is that there's going to be some condensation in the crankcase from the temp swings over the winter and a oil change in the spring after a good engine warm up gets rid of all that and has it ready for hard work when it is time to cut first cutting hay.
 
  • Like
Reactions: 1 users

mikester

Well-known member

Equipment
M59 TLB
Oct 21, 2017
3,549
2,010
113
Canada
www.divergentstuff.ca
If you leave your machine parked outdoors you can leave the filter and change only the oil to make you feel better.

If you run your machine hot moisture will be less of a problem. Short cold runs are asking for trouble.
 

will721

Active member

Equipment
LX2610, Ford 2n, Ferguson TO20
Jun 6, 2023
179
186
43
Quad Cities Area
Another vote for a yearly change. Every machine I have gets it either by mileage, hours, or yearly. I do it for condensation due to the extreme humidity and temperature swings we get.
 

Donystoy

Active member
Lifetime Member

Equipment
LX2610HSDCC, B/H, Loader, plus numerous other attachments. B7200 sold
Dec 10, 2013
566
217
43
Binbrook, Ontario
I change mine at recommended hours or yearly whichever comes first. Mine is stored in a climate-controlled shop.