Kubota M5950DT charge problem

WeldKid

New member

Equipment
Kubota M5950DT
Sep 28, 2018
2
0
0
Southern Tier, NY
I have my Kubota M5950DT at my Kubota repair location. But, they cannot figure what the problem is. Hopefully, someone out there will help.

I had the ignition switch, alternator, regulator all replaced. The wires are getting hot. The tractor does not charge.

It has been in their shop for almost 3 months. The shop even asked a Kubota rep what might be the problem and they did not know.

Please help as I have property to get back in shape.
 

JerryMT

Active member

Equipment
Kubota M4500, NH TD95D,Ford 4610
Jun 17, 2017
528
156
43
The Palouse - North Idaho
I have my Kubota M5950DT at my Kubota repair location. But, they cannot figure what the problem is. Hopefully, someone out there will help.

I had the ignition switch, alternator, regulator all replaced. The wires are getting hot. The tractor does not charge.

It has been in their shop for almost 3 months. The shop even asked a Kubota rep what might be the problem and they did not know.

Please help as I have property to get back in shape.
Hot wires usually indicate a short.
 

Fordtech86

Well-known member
Lifetime Member

Equipment
L3200
Aug 7, 2018
4,976
5,917
113
Pineville,LA
What wires are getting hot?a short would cause blown fuses,melted fuse links or melted wires.wires getting hot is usually high resistance or corrosion in the circuits
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,552
6,599
113
Sandpoint, ID
Hot wires usually indicate a short.
Not a short, but like Fordtech86 said high resistance.

HAs anyone done a load test on the battery, I've had a couple that the alanator was working triple time trying to outdo a bad battery, and yes it still started fine.
 

JohnDB

Active member
Lifetime Member

Equipment
M4500DT
Jun 9, 2018
396
71
28
NZ
Good suggestions above.

3 months seems an awful long time to troubleshoot this; and it sounds like the dealer is applying swapnostics not diagnostics, so maybe they aren't that clued up on basic electrical systems. Better to withdraw and get an autoelectrician to examine it. I hope they aren't expecting you to pay for the new parts they fitted - did they put the old ones back?
 

WeldKid

New member

Equipment
Kubota M5950DT
Sep 28, 2018
2
0
0
Southern Tier, NY
Thanks for the tips. I thought at first it was just the starter switch, but I was able to hotwire it. So, I had the Kubota dealer pick it up as they replaced my manifold in the past for this tractor. They aren't even letting me know the status. I have to keep up with them. They were also changing a rim, and could not find a rim for it. I had to find it for them and it was one tire dealer that they deal with all the time. DAHHH
I appreciate the input from everyone. Hopefully, they will find out the problem soon as the weather is changing.